Order Products : sales@su-jiao.com
HI-ZEX™ 1108J
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Prime Polymer Co., Ltd. |
| Trademark: | HI-ZEX™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | usgTu5_HI-ZEX-1108J.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| HI-ZEX™ 1108J is a High Density Polyethylene product. It can be processed by injection molding and is available in Asia Pacific, Europe, or North America. Typical application: Industrial Applications. Primary characteristic: good stiffness. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.961 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 8.0 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance | 4.00 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D, Injection Molded) | 65 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 1300 | MPa | ISO 527-2 |
| Tensile Stress (Yield, Injection Molded) | 27.0 | MPa | ISO 527-2 |
| Tensile Strain (Break, Injection Molded) | > 500 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 1300 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Unnotched Impact Strength | 4.0 | kJ/m² | ISO 179 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 126 | °C | ISO 306 |
| Melting Temperature | 134 | °C | ISO 11357-3 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Quadrant EPP TIVAR® Ceram P | Quadrant Engineering Plastic Products | UHMWPE | Quadrant EPP |
| Radilon® A RV500K 100 NAT | Radici Plastics | Nylon 66 | Radilon® |
| EPO-TEK® B9021-6 | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
| Optix® CA-75 UVA | Plaskolite, Inc. | Acrylic (PMMA) | Optix® |
| ALTECH® PC + ABS ECO 1000/106 | ALBIS PLASTIC GmbH | PC+ABS | ALTECH® PC + ABS |
