Order Products : sales@su-jiao.com

TEKNILID HS123

Category:	Film, Al Foil/LDPE , Al Foil/LDPE Film
Manufacturer:	Tekni-Films, a div of Tekni-Plex
Trademark:	TEKNILID
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	usXxpL_TEKNILID-HS123.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

This data sheet describes TEKNILID HS123 product

This lid stock is made with a heat seal (HS) low density polyethylene (LDPE) material for Food, Pharmaceutical, and Cosmetic applications requiring a weld seal to polyethylene (PE) and high oxygen and moisture barrier performance.

Soft Temper Aluminum foil is used for push-through blister packaging applications

It is available with custom and standard printing

General Information
Features	Food Contact Acceptable Moisture Barrier Oxygen Barrier
Uses	Cosmetics Lids Non-specific Food Applications Packaging Pharmaceuticals
Agency Ratings	FDA Unspecified Rating USP Unspecified Rating
Forms	Film

Films	Nominal Value	Unit
Film Thickness ¹	66.0	µm
Yield	9.47	m²/kg
Seal Strength
-- ²	0.53	N/mm
-- ³	0.53	N/mm
Oxygen Transmission Rate (23°C, 100% RH)	0.0	cm³/m²/24 hr
Water Vapor Transmission Rate (38°C, 90% RH)	0.0	g/m²/24 hr

Note Message
1 .	Thickness tolerance: ±10%
2 .	To HDPE @ 350°F, 40psi, 0.5 sec
3 .	To LDPE @ 350°F, 40psi, 0.5 sec

Resin Grade	Manufacturer	Category	Trademark
New-prene™ 6175N	Total Polymer Vision (Suzhou) Co., LTD	PP+EPDM	New-prene™
GAPEX® RPP05EU85NA	Ferro Corporation	PP, Unspecified	GAPEX®
King Pearl® G-3S	Loyal Chemical	PS (EPS)	King Pearl®
Panlite® ML-5206ZLS	TEIJIN LIMITED	PC	Panlite®
Shida 033	JINJIANG City SHIDA Plastic Fine Co., Ltd.	SBS	Shida