Order Products : sales@su-jiao.com

Edistir® N 2560

Category:	PS (GPPS) , General Purpose Polystyrene
Manufacturer:	Versalis S.p.A.
Trademark:	Edistir®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	urTSuS_Edistir-N-2560.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

High molecular weight general purpose polystyrene with good mechanical strength and good thermal resistance.

It is recommended for in—line forming of disposable packaging, for sheet extrusion in blend with conventional or clear high impact PS and for injection moulding of complex items requiring good toughness and improved elasticity.

Designation: Thermoplastics ISO 1622-PS,G,095-03

Applications
Suitable for thermoformed food packaging articles as drink and dairy cups, plates, trays and for injection moulded cd boxes, domestic appliances, stationery, cutlery, housewares.

General Information
Features	High elasticity High molecular weight Good strength Heat resistance, high Good toughness Compliance of Food Exposure General Disposable
Uses	Packaging Cup Electrical appliances Mixing Household goods Media packaging Sheet Food packaging General Stationery Disposable tableware Disposable wine set Bracket tray
Agency Ratings	Europe No 10/2011
UL File Number	E83071
Appearance	Clear/transparent
Forms	Particle
Processing Method	Film extrusion Extrusion Sheet extrusion molding Thermoforming Profile extrusion molding Injection molding
Multi-Point Data	Shear Modulus vs. Temperature (ISO 11403-1) Specific Heat vs. Temperature (ISO 11403-2) Specific Volume vs Temperature (ISO 11403-2) Viscosity vs. Shear Rate (ISO 11403-2)

Physical	Nominal Value	Unit	Test Method
Density	1.05	g/cm³	ISO 1183
Apparent Density	0.65	g/cm³	ISO 60
Melt Mass-Flow Rate (MFR) (200°C/5.0 kg)	3.8	g/10 min	ISO 1133
Molding Shrinkage	0.30 - 0.60	%	Internal method
Water Absorption (23°C, 24 hr)	< 0.10	%	ISO 62

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (M-Scale)	80		ISO 2039-2

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	3250	MPa	ISO 527-2/1
Tensile Stress (Break)	40.0	MPa	ISO 527-2/5
Tensile Strain (Break)	2.0	%	ISO 527-2/5
Flexural Stress ¹	75.0	MPa	ISO 178

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact			ISO 180/1A
-30°C	1.6	kJ/m²	ISO 180/1A
23°C	1.8	kJ/m²	ISO 180/1A

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Annealed)	84.0	°C	ASTM D648
Vicat Softening Temperature
--	97.0	°C	ISO 306/A50
--	91.0	°C	ISO 306/B50
CLTE - Flow	7.0E-5	cm/cm/°C	ASTM D696
Thermal Conductivity	0.17	W/m/K	ISO 8302

Electrical	Nominal Value	Unit	Test Method
Surface Resistivity	> 1.5E+15	ohms	IEC 60093
Volume Resistivity	> 7.0E+15	ohms·cm	IEC 60093
Dielectric Strength	70	kV/mm	IEC 60243-1
Dielectric Constant (50 Hz)	2.50		IEC 60250
Dissipation Factor (50 Hz)	2.0E-4		IEC 60250
Comparative Tracking Index (Solution A)	400	V	IEC 60112

Flammability	Nominal Value	Unit	Test Method
Flame Rating (1.50 mm, All Colors)	HB		UL 94
Glow Wire Ignition Temperature (1.60 mm)	650	°C	IEC 60695-2-13

Additional Information	Nominal Value
Designation	Thermoplastics ISO 1622-PS,G,095-03

Injection	Nominal Value	Unit
Processing (Melt) Temp	200 - 250	°C
Mold Temperature	10.0 - 50.0	°C

Injection instructions
Predrying normally not required

Extrusion	Nominal Value	Unit
Melt Temperature	210 - 240	°C

Note Message
1 .	2.0 mm/min

Resin Grade	Manufacturer	Category	Trademark
Telcar® TL-1402G	Teknor Apex Company	TPE	Telcar®
Haysite Plastics EMD	Haysite Reinforced Plastics	Polyester, TS	Haysite Plastics
MAJ'ECO DP300MLA	AD majoris	Biodeg Polymers	MAJ'ECO
MAJORIS BT372 - 5038	AD majoris	PP, Unspecified	MAJORIS
Hifax TYC 1168P VOLCANO GRAY	LyondellBasell Industries	PP, Unspecified	Hifax