Order Products : sales@su-jiao.com
Sindustris PC GP5009A
| Category: | PC , Polycarbonate |
| Manufacturer: | Sincerity Australia Pty Ltd. |
| Trademark: | Sindustris PC |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | uqSVzf_Sindustris-PC-GP5009A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Sindustris PC GP5009A is a Polycarbonate (PC) material. It is available in Asia Pacific for injection molding. Primary attribute of Sindustris PC GP5009A: High Flow. |
| General Information | |
|---|---|
| Features |
|
| UL File Number |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.10 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (250°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (3.20 mm) | 0.50 to 0.80 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, 3.20 mm) | 39.2 | MPa | ASTM D638 |
| Flexural Modulus 2(3.20 mm) | 1670 | MPa | ASTM D790 |
| Flexural Strength 3(3.20 mm) | 59.8 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.20 mm) | 450 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 6.40 mm) | 91.0 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 to 90.0 | °C | |
| Drying Time | 4.0 to 6.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Rear Temperature | 230 to 250 | °C | |
| Middle Temperature | 235 to 255 | °C | |
| Front Temperature | 235 to 255 | °C | |
| Nozzle Temperature | 235 to 255 | °C | |
| Processing (Melt) Temp | 235 to 250 | °C | |
| Mold Temperature | 50.0 to 70.0 | °C | |
| Screw Speed | 40 to 70 | rpm |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 10 mm/min |
| 3 . | 10 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVALEN® PH 56 FRD 1 | Plastcom | PP, Unspecified | SLOVALEN® |
| Tufpet PBT N1000 | Mitsubishi Rayon America Inc. | PBT | Tufpet |
| Utomer UT10P80A | Shanghai Utomer Material Science Co., Ltd. | TPU-Polyester | Utomer |
| APEX® 3211-60NT | Teknor Apex Company | PVC, Flexible | APEX® |
| Jiangsu Sinarise ZM828 | Jiangsu Sinarise New Material Technology Co., Ltd | TPE | Jiangsu Sinarise |
