Order Products : sales@su-jiao.com
Stratasys RGD525
| Category: | Unspecified , Unspecified |
| Manufacturer: | Stratasys |
| Trademark: | Stratasys |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | unUGW4_Stratasys-RGD525.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
High Temperature material (RGD525) has exceptional dimensional stability for thermal function testing of 3D models. The material has a heat deflection temperature (HDT) of 63-67 °C (145-153 °F) upon removal from the printer which can be increased to 75-80 °C (167-176 °F) after thermal post-treatment in a programmable oven. Ideal for:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.17 to 1.18 | g/cm³ | ASTM D792 |
| Water Absorption (24 hr) | 1.2 to 1.4 | % | ASTM D570 |
| Ash Content | 0.38 to 0.42 | % | USP 281 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale) | 78 to 83 | ||
| Durometer Hardness (Shore D) | 87 to 88 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 3200 to 3500 | MPa | ASTM D638 |
| Tensile Strength | 70.0 to 80.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 10 to 15 | % | ASTM D638 |
| Flexural Modulus | 3100 to 3500 | MPa | ASTM D790 |
| Flexural Strength | 110 to 130 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 14 to 16 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed 1 | 75.0 to 80.0 | °C | |
| 0.45 MPa, Unannealed | 63.0 to 67.0 | °C | |
| 1.8 MPa, Unannealed | 55.0 to 57.0 | °C | |
| Glass Transition Temperature | 62.0 to 65.0 | °C | DMA |
| Note Message | |
|---|---|
| 1 . | After thermal post treatment procedure A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| polyvic® E-1828-IL | Unipack Plasindo | PVC, Unspecified | polyvic® |
| Thermec™ 4150CF20 | Technical Polymers, LLC | PPS | Thermec™ |
| Edgetek™ AT-30GF/000 NC005 S-ROHS | PolyOne Corporation | Acetal (POM) Copolymer | Edgetek™ |
| LNP™ THERMOCOMP™ RX06421S compound | SABIC Innovative Plastics | Nylon 66 | LNP™ THERMOCOMP™ |
| LUBEXAN 2025 GREY TQ | LUBEN PLAST srl | PC | LUBEXAN |
