RTP 299 A X 90821

Category: Nylon 6 , Polyamide 6
Manufacturer: RTP Company
Trademark: RTP
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: umP5AD_RTP-299-A-X-90821.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
PTFE Lubricated - Perfluoropolyether Oil
General Information
Additive
  • PTFE lubricant
  • Polyperfluoroether oil lubricant
Features
  • Lubrication
RoHS Compliance
  • Contact manufacturer
Processing Method
  • Injection molding
PhysicalNominal ValueUnitTest Method
Specific Gravity 1.16g/cm³ASTM D792
Molding Shrinkage - Flow (3.20 mm)1.0 - 2.0%ASTM D955
Moisture Content 0.20%
MechanicalNominal ValueUnitTest Method
Tensile Modulus 2760MPaASTM D638
Tensile Strength 68.9MPaASTM D638
Tensile Elongation (Yield)> 10%ASTM D638
Flexural Modulus 2760MPaASTM D790
Flexural Strength 103MPaASTM D790
ImpactNominal ValueUnitTest Method
Notched Izod Impact (3.20 mm)64J/mASTM D256
Unnotched Izod Impact (3.20 mm)1600J/mASTM D4812
ThermalNominal ValueUnitTest Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)71.1°CASTM D648
ElectricalNominal ValueUnitTest Method
Volume Resistivity 1.0E+14 - 1.0E+16ohms·cmASTM D257
FlammabilityNominal ValueUnitTest Method
Flame Rating (1.50 mm, ** Values per RTP Company testing.)HBUL 94
InjectionNominal ValueUnit
Drying Temperature 82.2°C
Drying Time 2.0hr
Dew Point -17.8°C
Processing (Melt) Temp 243 - 279°C
Mold Temperature 54.4 - 93.3°C
Injection Pressure 68.9 - 103MPa
Injection instructions
Desiccant Type Dryer Required.
Resin Grade Manufacturer Category Trademark
SHIN-A SEV-1131M80 SHIN-A T&C Epoxy SHIN-A
TAROLOY 10 Taro Plast S.p.A. PC+PBT TAROLOY
Hipolyene 8501 T6 B Zylog Plastalloys TPO (POE) Hipolyene
Iupilon® GSH2020R2 Mitsubishi Engineering-Plastics Corp PC Iupilon®
POLYfill PPC T4030 E20 Polykemi AB PP Copolymer POLYfill