Order Products : sales@su-jiao.com
Generic TPU, Unspecified - Glass Fiber, Long
| Category: | TPU, Unspecified , Thermoplastic Polyurethane Elastomer |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | umD7cS_Generic-TPU-Unspecified---Glass-Fiber-Long.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic TPU, Unspecified - Glass Fiber, Long This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.42 - 1.63 | g/cm³ | ASTM D792 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 6890 - 20000 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 2.5 | % | ASTM D638 |
| Flexural Modulus (23°C) | 6210 - 20000 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 221 - 362 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 270 - 640 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 85.0 - 143 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 79.4 - 82.4 | °C | |
| Rear Temperature | 216 - 246 | °C | |
| Middle Temperature | 218 - 252 | °C | |
| Front Temperature | 218 - 257 | °C | |
| Nozzle Temperature | 248 - 253 | °C | |
| Processing (Melt) Temp | 249 - 257 | °C | |
| Mold Temperature | 65.6 - 80.6 | °C |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic TPU, Unspecified - Glass Fiber, LongThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Vinakon® XL79449 | INEOS Compounds | PVC, Rigid | Vinakon® |
| APEL™ APL6013T | Mitsui Chemicals America, Inc. | COC | APEL™ |
| Lotrène® LDPE MG70 | QAPCO | LDPE | Lotrène® LDPE |
| SQUARE® LIM6968-50A/B | Shenzhen SQUARE Silicone Co., Ltd. | Silicone Rubber, LSR | SQUARE® |
| Durethan® AKV 35 000000 | LANXESS GmbH | Nylon 66 | Durethan® |
