Order Products : sales@su-jiao.com
Mytex® AS65KW-1ATM
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Mytex Polymers |
| Trademark: | Mytex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | uld9iz_Mytex-AS65KW-1ATM.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Talc fllled compounded polypropylene produced for automotive interior applications using Mytex® Technology. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.06 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 19 | g/10 min | ASTM D1238 |
| Ash Content | 23 | % | ASTM D5630 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 70 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 23.0 | MPa | ASTM D638 |
| Flexural Modulus - Tangent 2 | 2450 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 450 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 125 | °C | ASTM D648 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® HDPE F4520 | Saudi Basic Industries Corporation (SABIC) | HDPE | SABIC® HDPE |
| VECTRA® E473i | Celanese Corporation | LCP | VECTRA® |
| NYCOA Polyamide 5013 HS | Nycoa (Nylon Corporation of America) | Nylon 66 | NYCOA Polyamide |
| LG PMMA EG920B | LG MMA Corp. | Acrylic (PMMA) | LG PMMA |
| Hostacom ERC 213N NAT | LyondellBasell Industries | PP Copolymer | Hostacom |
