Order Products : sales@su-jiao.com
Vistamaxx™ 6502
| Category: | PP Elastomer , Performance Polymer |
| Manufacturer: | ExxonMobil Chemical |
| Trademark: | Vistamaxx™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ukGa7H_Vistamaxx6502.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Vistamaxx 6502 is primarily composed of isotactic propylene repeat units with random ethylene distribution, and is produced using ExxonMobil's proprietary metallocene catalyst technology. |
| General Information | |
|---|---|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1 | 0.865 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) 2 | ASTM D1238 | ||
| 190°C/2.16 kg | 20 | g/10 min | ASTM D1238 |
| 230°C/2.16 kg | 48 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 71 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Fracture | > 9.65 | MPa | ASTM D638 |
| 100% strain | 2.71 | MPa | ASTM D638 |
| 300% strain | 2.83 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 1900 | % | ASTM D638 |
| Flexural Modulus - 1% Secant | 20.5 | MPa | ASTM D790 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength 3 | 38.4 | kN/m | ASTM D624 |
| Additional Information |
|---|
| 按照 FDA 食品接触物质通告 (FCN) 第 936, 部分，本产品可在 21 CFR 176.170( c) 表 2 中所述的 C - G 使用条件下用作与所有类型食品接触的材料或其组成部 分。本产品所用的基础树脂是中国关于食品包装材料用树脂的肯定列表（2011 年 10 月 11 日由中国卫生部签发）中所列的树脂；而且，本产品中可能使用的添加剂 也符合中华人民共和国国家标准 GB9685-2008（即食品容器、包装材料用添加剂使 用卫生标准）。欧盟注释：本产品的成分符合欧盟规范 10/2011 关于食品接触的要求。请与客户服务部联系，索取包含更多详细信息的正式食品法规证书。 |
| Legal statement |
|---|
| 未经埃克森美孚化工书面允许，该产品包括其产品名称，不得在任何医疗应用领域 予以使用或者测试。有关详细的产品监管信息，请联系客户服务。 |
| Note Message | |
|---|---|
| 1 . | Properties are expressed in commonly used units of measurement. |
| 2 . | Properties are expressed in commonly used units of measurement. |
| 3 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Visiloy™ 2615R11U2 | Technical Polymers, LLC | PC+PBT | Visiloy™ |
| Fainplast PVC KL 93/3 | Fainplast Compounds S.r.l | PVC, Unspecified | Fainplast PVC |
| FARALLOY® PP-210 | O'Neil Color and Compounding | PP, Unspecified | FARALLOY® |
| Globalene® 73F4-3 | Lee Chang Yung Chemical Industry Corp. | PP Alloy | Globalene® |
| Hyundai EP PA66 LD280 | HYUNDAI EP Co., Ltd. | Nylon 66 | Hyundai EP PA66 |
