Order Products : sales@su-jiao.com

NuSil FS-3730-2

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	uedTRl_NuSil-FS-3730-2.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
The Aircraft Industry has used silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections. Fuel Resistance Static Dissipation and Electrically Conductive Silicones Ice-Phobic Coatings General Purpose: Adhesives and Sealants Comment: Lap Shear after 7 days 300 psi (2.1 MPa)

Message

The Aircraft Industry has used silicone adhesives and coatings for over five decades. Silicone's ability to maintain its elasticity and low modulus over a broad temperature range provides excellent utility in extreme environments. Recent advances in material technology provide more opportunities for the Aircraft engineer in choosing the best material for an intended application. Examples of NuSil's capabilities in custom silicones for Aircraft are demonstrated in the following sections.

Fuel Resistance

Static Dissipation and Electrically Conductive Silicones

Ice-Phobic Coatings

General Purpose: Adhesives and Sealants

Comment: Lap Shear after 7 days 300 psi (2.1 MPa)

General Information
Features	Electrically Conductive Fuel Resistant
Uses	Adhesives Aircraft Applications Sealants

Thermoset	Nominal Value	Unit
Tack Free Time	10.0	min

Additional Information	Nominal Value	Unit
Cure System	Acetoxy
Operating Temperature	-50 to 200	°C

Uncured Properties	Nominal Value	Unit
Color	Black
Density	1.41	g/cm³
Curing Time (23°C)	72	hr

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	40
Lap Shear Strength ¹	2.07	MPa
Tensile Strength	4.14	MPa
Tensile Elongation at Break	300	%
Tear Strength	8.76	kN/m

Note Message
1 .	Primed with SP-130

Resin Grade	Manufacturer	Category	Trademark
TECHNYL® A 117 V33 BLACK 61 LP	Solvay Engineering Plastics	Nylon 66	TECHNYL® A
ExxonMobil™ HDPE HD 6908 Series	ExxonMobil Chemical	HDPE, UHMW	ExxonMobil™ HDPE
Escorene™ Ultra LD 701.ID	ExxonMobil Chemical	EVA	Escorene™ Ultra
LEXAN™ PC1800R resin	SABIC Innovative Plastics	PC	LEXAN™
Hostacom ERC 342N E1 C11306	LyondellBasell Industries	PP Copolymer	Hostacom