Order Products : sales@su-jiao.com
Vibrathane® B844
| Category: | PUR-Ether/TDI , Polyurethane (Polyether, TDI) |
| Manufacturer: | Chemtura |
| Trademark: | Vibrathane® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | uc8dID_Vibrathane-B844.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
VIBRATHANE B844 is a medium performance, polyether-based TDI-terminated liquid urethane prepolymer that is readily processable by conventional hand and machine mixing techniques. When cured with 4'4- Methylene-Bis [2-Chloroaniline], this member of the VIBRATHANE family produces vulcanizes with an 80 Shore A hardness. These elastomers have properties similar to, but somewhat lower than those of VIBRATHANE B 602. They are most often used in less demanding applications. The polymer us characterized by good processibility due to its:
|
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.12 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 80 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% Strain | 4.14 | MPa | |
| 300% Strain | 6.89 | MPa | |
| Tensile Strength | 20.3 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 600 | % | ASTM D412 |
| Tear Strength | |||
| -- 1 | 52.5 | kN/m | ASTM D624 |
| Split | 12 | kN/m | ASTM D470 |
| Compression Set (70°C, 22 hr) | 35 | % | ASTM D395B |
| Bayshore Resilience | 25 | % | ASTM D2632 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 10 | ||
| Resin | Mix Ratio by Weight: 100 | ||
| Pot Life | 15 | min | |
| Post Cure Time (70°C) | 16 | hr |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Curing Time (100°C) | 1.0 | hr |
| Note Message | |
|---|---|
| 1 . | Die C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| tefabloc® TO 113 | Mitsubishi Chemical Performance Polymers, Inc. | TPE | tefabloc® |
| TRISTAR® PC-10R-CL(15) | Polymer Technology and Services, LLC | PC | TRISTAR® |
| NOVADURAN® 5010GT15X | Mitsubishi Engineering-Plastics Corp | PBT | NOVADURAN® |
| Grilon® TSM-30/2 | EMS-GRIVORY | Nylon 66/6 | Grilon® |
| OmniLon™ PA6/6 GR33 FR All Colors | OMNI Plastics, LLC | Nylon 66 | OmniLon™ |
