Order Products : sales@su-jiao.com
EPO-TEK® 509FM-1
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | Epoxy Technology Inc. |
| Trademark: | EPO-TEK® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | uc4Rqp_EPO-TEK-509FM-1.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| EPO-TEK® 509FM-1 is a two component, optically opaque epoxy designed for potting of semiconductors, PCB and systems-level electronics. It can be used in many electronic industries such as consumer, military, medical and optical/OEM. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Glass Transition Temperature 1 | > 40.0 | °C | |
| CLTE - Flow | |||
| -- 2 | 5.5E-5 | cm/cm/°C | |
| -- 3 | 1.9E-4 | cm/cm/°C |
| Optical | Nominal Value | Unit | |
|---|---|---|---|
| Transmittance (400 to 2500 nm) | < 5.0 | % |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Part A | Mix Ratio by Weight: 100 | ||
| Part B | Mix Ratio by Weight: 68 | ||
| Shelf Life (23°C) | 52 | wk |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Degradation Temperature | 365 | °C | TGA |
| Die Shear Strength - >10 kg (23°C) | 23.4 | MPa | |
| Operating Temperature | |||
| Continuous | -55 to 200 | °C | |
| Intermittent | -55 to 300 | °C | |
| Storage Modulus (23°C) | 2.26 | GPa | |
| Weight Loss on Heating | |||
| 200°C | 0.29 | % | |
| 250°C | 1.1 | % | |
| 300°C | 3.5 | % |
| Uncured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Color | |||
| -- 4 | Amber | ||
| -- 5 | Black | ||
| Density | |||
| Part B | 1.01 | g/cm³ | |
| Part A | 1.16 | g/cm³ | |
| Viscosity 6(23°C) | 0.40 to 1.0 | Pa·s | |
| Curing Time (60°C) | 2.0 | hr | |
| Pot Life | 20 | min |
| Cured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 85 | ||
| Lap Shear Strength (23°C) | 11.7 | MPa | |
| Relative Permittivity (1 kHz) | 3.65 | ||
| Volume Resistivity (23°C) | > 3.0E+13 | ohms·cm | |
| Dissipation Factor (1 kHz) | 7.0E-3 |
| Note Message | |
|---|---|
| 1 . | Dynamic Cure 20-200°C/ISO 25 Min; Ramp -10-200°C @ 20°C/Min |
| 2 . | Below Tg |
| 3 . | Above Tg |
| 4 . | Part B |
| 5 . | Part A |
| 6 . | 100 rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SLOVAMID® 6 GF 5 FRA 5 | Plastcom | Nylon 6 | SLOVAMID® 6 |
| Aaron AVPE HD 300-3 | Aaron Industries Corp. | HDPE | Aaron |
| EMOPLEN® HP-R MTF 20 | EMAS Plastik San.Tic.AS. | PP Homopolymer | EMOPLEN® |
| EMERGE™ PC 8702-15 (AP) | Trinseo | PC | EMERGE™ |
| OmniCarb™ PC/ABS 1412 CTI | OMNI Plastics, LLC | PC+ABS | OmniCarb™ |
