Order Products : sales@su-jiao.com
Moplen HP740H
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | LyondellBasell Industries |
| Trademark: | Moplen |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | uamITE_Moplen-HP740H.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Moplen HP740H is a polypropylene homopolymer. With its good stiffness and top load strength, this grade is especially suitable for solid phase pressure thermoforming process. Potential end use products include drinking, margarine, noodle and dairy cups, etc. all of which can be hot fillable or microwaveable. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.900 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 2.1 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 36.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 9.0 | % | ASTM D638 |
| Flexural Modulus | 1750 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 40 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 115 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ultramid® 8231G HS BK-102 | BASF Corporation | Nylon 6 | Ultramid® |
| ADDINYL C2 ZV20 | ADDIPLAST | Nylon 66/6 | ADDINYL |
| Daelim Po1y® PH-870 | DAELIM INDUSTRIAL CO., LTD. | PP Homopolymer | Daelim Po1y® |
| EVICOM™ GA1/081 | INEOS Compounds | PVC, Flexible | EVICOM™ |
| Formolene® E927ND | Formosa Plastics Corporation, U.S.A. | HDPE, HMW | Formolene® |
