Order Products : sales@su-jiao.com
Formolene® HB5502Z
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Formosa Plastics Corporation, U.S.A. |
| Trademark: | Formolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | uaGOQz_Formolene-HB5502Z.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Formolene® HB5502Z eliminates the need for including a mold release agent at each machine, by incorporating zinc stearate with the resin. This incorporation assures uniform consistent release properties. It may be used as an injection blow molding resin. Formolene® HB5502Z meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.955 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.35 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | |||
| Compression Molded, F50 | 35.0 | hr | ASTM D1693B |
| 100% Igepal, Compression Molded, F50 | 45.0 | hr | ASTM D1693A |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Compression Molded) | 27.6 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, Compression Molded) | 600 | % | ASTM D638 |
| Flexural Modulus (Compression Molded) | 1380 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -118 | °C | ASTM D746 |
| Note Message | |
|---|---|
| 1 . | Type IV, 51 mm/min |
| 2 . | Type IV, 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Topilene® HJ801R | Hyosung Corporation | PP Homopolymer | Topilene® |
| ULTEM™ UF5011S resin | SABIC Innovative Plastics Europe | PEI | ULTEM™ |
| Alpha PVC 2212-100 CLEAR 0003 | AlphaGary | PVC, Semi-Rigid | Alpha PVC |
| EVAL™ E171 | Kuraray Co., Ltd. | EVOH | EVAL™ |
| Lucky Enpla LGF3300 | Lucky Enpla Co LTD | PBT | Lucky Enpla |
