Order Products : sales@su-jiao.com
CONAP® EN-5330
| Category: | PUR, Unspecified , Polyurethane |
| Manufacturer: | Cytec Industries Inc. |
| Trademark: | CONAP® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | uXvyhh_CONAP-EN-5330.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| CONAP EN-5330 is halogen free based on IEC 61249-2-21 CONAP EN-5330 is a filled two-component polyurethane system designed for use as a potting and encapsulating material for electronic components where critical thermal cycling characteristics are a factor. CONAP EN-5330 has excellent electrical properties, low shrinkage, low stress build-up, and can be hand mixed or machine dispensed. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | |||
| -- 1 | 1.21 | g/cm³ | |
| -- 2 | 1.52 | g/cm³ |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Durometer Hardness (Shore D) | 52 |
| Elastomers | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength | 6.89 | MPa | |
| Tensile Elongation (Break) | 57 | % | |
| Tear Strength | 22.8 | kN/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermal Conductivity 3 | 0.57 | W/m/K | Internal Method |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 3.5E+15 | ohms | |
| Volume Resistivity (25°C) | 3.1E+14 | ohms·cm | |
| Dielectric Strength | 21 | kV/mm | |
| Dielectric Constant (25°C, 1 MHz) | 3.60 | ||
| Dissipation Factor (25°C, 1 MHz) | 0.025 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (6.00 mm) | V-0 | UL 94 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 100 | ||
| Resin | Mix Ratio by Weight: 17 | ||
| Thermoset Mix Viscosity (25°C) | 5000 | cP |
| Note Message | |
|---|---|
| 1 . | Resin |
| 2 . | Hardener |
| 3 . | MIL-16923E |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| tefabloc® TP SD 300 80A | Mitsubishi Chemical Performance Polymers, Inc. | TPE | tefabloc® |
| SITRALOY 405 / C94150 | SITRAPLAS GmbH | PC+ABS | SITRALOY |
| TRISTAR® PC-10FR-(18) | Polymer Technology and Services, LLC | PC | TRISTAR® |
| XYRON™ SZ800 | Asahi Kasei Chemicals Corporation | PPE+PS | XYRON™ |
| POLYFLON™ D-3A | DAIKIN AMERICA, INC. | PTFE | POLYFLON™ |
