Order Products : sales@su-jiao.com
Spartech Polycom SC5-4120H
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | Spartech Polycom |
| Trademark: | Spartech |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | uWogk8_Spartech-Polycom-SC5-4120H.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Spartech SC5-4120H is a medium viscosity PP copolymer resin for injection molding that features an unspecified amount of mica/calcium carbonate reinforcement. It is heat stabilized and lubricated for good processing characteristics. Polypropylene is a versatile thermoplastic offering a useful balance of heat and chemical resistance, good mechanical and electrical properties and processing ease. PP is resistant to deformation at elevated temperatures. A very versatile product for a wide variety of applications, Spartech SC5-4120H is recommended for industrial, transportation, sporting goods and electrical/electronic applications. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 16 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 24.1 | MPa | ASTM D638 |
| Flexural Modulus (23°C) | 1380 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 59 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 64.0 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 90.6 | °C | |
| Drying Time | 1.0 | hr | |
| Rear Temperature | 216 - 227 | °C | |
| Middle Temperature | 221 - 232 | °C | |
| Front Temperature | 227 - 238 | °C | |
| Nozzle Temperature | 232 - 243 | °C | |
| Processing (Melt) Temp | 204 - 260 | °C | |
| Mold Temperature | 26.7 - 37.8 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RheTech Polypropylene G20P252-00A | RheTech, Inc. | PP Copolymer | RheTech Polypropylene |
| SLOVAMID® 66 GF 40 E | Plastcom | Nylon 66 | SLOVAMID® 66 |
| Flexirene® FH 56 A | Versalis S.p.A. | LLDPE | Flexirene® |
| Genestar™ GA2330 | Kuraray Co., Ltd. | Nylon 9T | Genestar™ |
| ELASTOSIL® LR 3070/30 A/B | Wacker Chemie AG | Silicone | ELASTOSIL® LR |
