Monprene® OM-12341 XRD1 (Preliminary Data) Datasheet,TPE,Teknor Apex Company-SHANGHAI SUSHENG

Message
Monprene OM-12341 XRD1 is a specialty thermoplastic elastomer, available in NAT, BLK, and colors, designed for overmolding applications like grips and anti-skid parts for consumer and industrial products. Monprene OM-12341 XRD1 is a low hardness, medium density, filled grade that exhibits excellent adhesion to polystyrene(PS) and can be processed via injection and multi-injection molding.

General Information
Features	Excellent Processability Adhesiveness Good adhesion Medium liquidity Good chemical resistance Fill Hardness, low Medium density
Uses	Washer Soft handle Rubber substitution Footwear Bonding
RoHS Compliance	RoHS compliance
Appearance	Black Available colors Natural color
Forms	Particle
Processing Method	Multiple injection molding Injection molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.990	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	4.0	g/10 min	ASTM D1238

Hardness	Nominal Value	Test Method
Durometer Hardness		ASTM D2240
Shore A, 1 second, injection molding	43	ASTM D2240
Shore A, 5 seconds, injection molding	40	ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹			ASTM D412
Transverse flow : 100% strain	1.25	MPa	ASTM D412
Flow : 100% strain	1.50	MPa	ASTM D412
Transverse flow : 300% strain	1.90	MPa	ASTM D412
Flow : 300% strain	2.40	MPa	ASTM D412
Tensile Strength ²			ASTM D412
Transverse flow : Fracture	4.00	MPa	ASTM D412
Flow : Fracture	2.90	MPa	ASTM D412
Tensile Elongation ³			ASTM D412
Transverse flow : Fracture	720	%	ASTM D412
Flow : Fracture	490	%	ASTM D412
Tear Strength ⁴			ASTM D624
Transverse flow	28.0	kN/m	ASTM D624
Flow	19.0	kN/m	ASTM D624
Compression Set ⁵			ASTM D395B
23°C, 22 hr	14	%	ASTM D395B
70°C, 22 hr	96	%	ASTM D395B

Additional Information	Nominal Value
Adhesion to PS

Legal statement
The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Legal statement

The information and recommendations contained in this bulletin are, to the best of our knowledge, accurate and reliable but no guarantee of their accuracy is made. All products are sold upon condition that purchasers shall make their own tests to determine the suitability of such products for their particular purposes and uses and purchaser assumes all risks and liability for the results of use of the products, including use in accordance with seller's recommendations. Nothing in this bulletin constitutes permission or a recommendation to practice or use any invention covered by any patent owned by this company or others. There is no warranty of merchantability and there are no other warranties for the products described. For detailed Product Stewardship information, please contact us. Any product of Teknor Apex, including product names, shall not be used or tested in medical or food contact applications without the prior written acknowledgement of Teknor Apex as to the intended use. Please note that some products may not be available in one or more countries.

Injection	Nominal Value	Unit
Rear Temperature	175 - 195	°C
Middle Temperature	180 - 200	°C
Front Temperature	195 - 215	°C
Nozzle Temperature	205 - 225	°C
Processing (Melt) Temp	188 - 210	°C
Mold Temperature	20 - 40	°C
Injection Pressure	1.38 - 6.89	MPa
Injection Rate	Moderate-Fast
Back Pressure	0.172 - 0.345	MPa
Screw Speed	50 - 100	rpm
Cushion	3.81 - 25.4	mm

Injection instructions
Drying is not necessary. However, if moisture is a problem, dry the pellets for 2 to 4 hours at 150°F (65°C).

Note Message
1 .	C mold, 510mm/min
2 .	C mold, 510mm/min
3 .	C mold, 510mm/min
4 .	C mold, 510mm/min
5 .	Type 1

Category:	TPE , Thermoplastic Elastomer
Manufacturer:	Teknor Apex Company
Trademark:	Monprene®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	uWGYKq_MonpreneOM12341XRD1PreliminaryData.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
AKROMID® S3 GF 50 1 black (3441)	AKRO-PLASTIC GmbH	Nylon 610	AKROMID®
Colorite G Series 10012G-015	Colorite Polymers	PVC, Flexible	Colorite G Series
EPO-TEK® H20E-SLR	Epoxy Technology Inc.	Epoxy	EPO-TEK®
MARPOL® LL6R 802	Marco Polo International, Inc.	LLDPE	MARPOL®
Sylvin 8773-60D Grey 9508	Sylvin Technologies Incorporated	PVC, Rigid	Sylvin