Order Products : sales@su-jiao.com
Edgetek™ PK-000/000 Natural
| Category: | PEEK , Polyetheretherketone |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Edgetek™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | uVUTb8_Edgetek-PK-000-000-Natural.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Edgetek®The engineering thermoplastic polymer product portfolio includes a series of standard and customizable high-performance materials. The combination includes high-temperature resistant materials for high-temperature working environments, and high-modulus/structural materials for load-bearing, high-strength applications and flame-retardant products. These polymers are made by mixing engineering thermoplastic resins with different reinforcing additives, such as carbon fiber, glass fiber and glass beads. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.30 | g/cm³ | ASTM D792 |
| Molding Shrinkage | 0.70 - 1.2 | % | ISO 294-4 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 3700 | MPa | ASTM D638 |
| Tensile Strength (Yield, 23°C) | 98.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 20 | % | ASTM D638 |
| Flexural Modulus | 3350 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 145 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 60 | J/m | ASTM D256 |
| Unnotched Izod Impact | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 146 | °C | ASTM D648 |
| Glass Transition Temperature | 143 | °C | ASTM D3418 |
| Melting Temperature | 342 | °C | ASTM D3418 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | > 1.0E+15 | ohms | ASTM D257 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 150 - 160 | °C | |
| Drying Time | 3.0 - 4.0 | hr | |
| Processing (Melt) Temp | 350 - 390 | °C | |
| Mold Temperature | 180 - 200 | °C |
| Injection instructions |
|---|
| Injection Pressure: MED-HIGHHold Pressure: MED-HIGHScrew Speed: MODERATEBack Pressure: LOW |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sasol Polymers PE HF140 | Sasol Polymers | LLDPE | Sasol Polymers PE |
| Nypol® PA B3 G30 HL UV PRTA011 NT341 | Petropol Industry and Trade of Polymers LTDA | Nylon 6 | Nypol® PA |
| Exxtral™ Performance Polyolefin HMU404 | ExxonMobil Chemical | TPO | Exxtral™ Performance Polyolefin |
| Geon™ Vinyl Flexible R252AE | PolyOne Corporation | PVC+NBR | Geon™ Vinyl Flexible |
| LNP™ LUBRICOMP™ IFL36 compound | SABIC Innovative Plastics | Nylon 612 | LNP™ LUBRICOMP™ |
