Order Products : sales@su-jiao.com
Ebalta GM 955-70 / Comp. A+B
| Category: | PUR, Unspecified , Polyurethane |
| Manufacturer: | Ebalta Kunststoff GmbH |
| Trademark: | Ebalta |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | uVAM6S_Ebalta-GM-955-70-Comp-A-B.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This product is a polyurethane system. If the product is cured at room temperature, no entire chemical and mechanical load before 7 days after curing. The product can be subject to colour variations due to raw materials, but these colour variations have no influence on the quality and the properties of the product. Applications
Properties
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Shore Hardness (Shore A) | 67 to 73 | ISO 7619 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(Yield) | 5.50 to 6.50 | MPa | ISO 37 |
| Tensile Elongation 2(Break) | 300 to 400 | % | ISO 37 |
| Tear Strength | ISO 34-1 | ||
| 1.00 mm 3 | 30 to 32 | kN/m | |
| 1.00 mm 4 | 7.0 to 9.0 | kN/m |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 17 | ||
| Resin | Mix Ratio by Weight: 100 |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Density (20°C) | 1.25 to 1.31 | g/cm³ | |
| Viscosity (25°C) | 4.0 to 5.0 | Pa·s | |
| Curing Time (20°C) | 6.0 to 20 | hr | |
| Pot Life 5(20°C) | 20 to 30 | min |
| Note Message | |
|---|---|
| 1 . | Type 2 |
| 2 . | Type 2 |
| 3 . | Arch shaped test piece without incision |
| 4 . | Arch shaped test piece with incision |
| 5 . | 200 g |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 282 A | RTP Company | Nylon 6 | RTP |
| Sumikon® EME-7351LS | Sumitomo Bakelite Co., Ltd. | Epoxy | Sumikon® |
| TAIRIPRO F4008 | Formosa Plastics Corporation | PP Random Copolymer | TAIRIPRO |
| ALTECH® PP-H A 2030/750 GF30 CP | ALBIS PLASTIC GmbH | PP Homopolymer | ALTECH® PP-H |
| ISORENE™ SA4-1001 | SABIC Innovative Plastics Europe | TPE | ISORENE™ |
