Order Products : sales@su-jiao.com
INNOPOL® PE CS 5-8250 W
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Inno-Comp Ltd. |
| Trademark: | INNOPOL® PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | uUe3wc_INNOPOL-PE-CS-5-8250-W.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
INNOPOL ® CS 5-8250 W is a 50% chalk filled compound based on high density polyethylene. This grade is available only in white coloured form. Recommended application INNOPOL ® CS 5-8250 W is developed for packaging film production. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Resin ID (ISO 1043) |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 1.46 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.35 | g/10 min | ISO 1133 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 527-3 | ||
| MD : Break | 15.0 | MPa | |
| TD : Break | 8.00 | MPa | |
| Tensile Elongation | ISO 527-3 | ||
| MD : Break | > 250 | % | |
| TD : Break | > 100 | % | |
| Dart Drop Impact | 20 | g | ISO 7765-1 |
| Elmendorf Tear Strength | ISO 6383-2 | ||
| MD | 0.12 | N | |
| TD | 1.4 | N |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 2.0 | hr | |
| Suggested Max Moisture | 0.060 | % | |
| Cylinder Zone 1 Temp. | 160 to 200 | °C | |
| Cylinder Zone 2 Temp. | 160 to 200 | °C | |
| Cylinder Zone 3 Temp. | 160 to 200 | °C | |
| Cylinder Zone 4 Temp. | 160 to 200 | °C | |
| Cylinder Zone 5 Temp. | 160 to 200 | °C | |
| Melt Temperature | 190 to 210 | °C | |
| Die Temperature | 180 to 200 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 200 E | RTP Company | Nylon, Unspecified | RTP |
| RTP 3499-4 X 91192 A | RTP Company | LCP | RTP |
| Hifax CA 7271 A | LyondellBasell Industries | TPO (POE) | Hifax |
| EPAMOULD 295A14W | Epaflex Polyurethanes S.R.L. | TPU-Polyester | EPAMOULD |
| Monprene® MP-3020 XRD1 (PRELIMINARY DATA) | Teknor Apex Company | TPE | Monprene® |
