Order Products : sales@su-jiao.com
Zythane® 7070AF
| Category: | TPU-Polyether , Thermoplastic Polyurethane Elastomer (Polyether) |
| Manufacturer: | Alliance Polymers & Services |
| Trademark: | Zythane® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | uUdzLu_Zythane-7070AF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Zythane 7070AF is a polyether--based FR TPU specifically formulated for both injection molding and extrusion applications with ease of processing. It exhibits excellent flame retandance, abrasion resistance and toughness and has good hydrolytic stability, oil, fuel and solvent resistance. It is supplied uncolored in pellet form. Typical Applications: Zythane 7070AF applications include among others FDA applications, cable sheathing, spiral and pneumatic tubing, film, irrigation hoses, conveyor hoses, fire hoses, hydraulic hoses, cable jacketing, flat flex cables, automotive sensor cables. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.10 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 70 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Taber Abrasion Resistance | 37.0 | mg | ASTM D1044 |
| Abrasion - DIN | 30 | mm³ | DIN 53516 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 3.00 | MPa | ASTM D412 |
| 300% strain | 6.00 | MPa | ASTM D412 |
| Tensile Strength (Break) | 24.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 800 | % | ASTM D412 |
| Tear Strength 1 | 68.6 | kN/m | ASTM D624 |
| Compression Set | ASTM D395B | ||
| 24°C, 22 hr | 22 | % | ASTM D395B |
| 70°C, 72 hr | 37 | % | ASTM D395B |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -53.9 | °C | DSC |
| Vicat Softening Temperature | 75.0 | °C | ASTM D1525 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.00 mm | HB | UL 94 | |
| 1.50 mm | HB | UL 94 | |
| 3.00 mm | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 85.0 | °C | |
| Drying Time | 4.0 | hr | |
| Rear Temperature | 165 | °C | |
| Middle Temperature | 180 | °C | |
| Front Temperature | 195 | °C | |
| Nozzle Temperature | 195 - 200 | °C | |
| Processing (Melt) Temp | 190 - 195 | °C | |
| Mold Temperature | 25.0 - 60.0 | °C | |
| Back Pressure | 0.500 - 1.00 | MPa | |
| Screw Speed | 60 - 200 | rpm | |
| Clamp Tonnage | 4.1 - 6.9 | kN/cm² |
| Injection instructions |
|---|
| Injection Speed: >.4 in/sec |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 85.0 | °C | |
| Drying Time | 4.0 | hr | |
| Cylinder Zone 1 Temp. | 165 | °C | |
| Cylinder Zone 2 Temp. | 180 | °C | |
| Cylinder Zone 3 Temp. | 195 | °C | |
| Die Temperature | 198 | °C |
| Extrusion instructions |
|---|
| Gate Temperature: 195°C (383°F) |
| Note Message | |
|---|---|
| 1 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris PP H7412 | Sincerity Australia Pty Ltd. | PP, Unspecified | Sindustris PP |
| Delta ATL-1TFP40 | Delta Polymers | Acetal (POM) Homopolymer | Delta |
| Hostaform® XT 20 | Celanese Corporation | Acetal (POM) Copolymer | Hostaform® |
| LOXIM 820 01 HB | LOXIM Industries Private Limited | PP, Unspecified | LOXIM |
| Sylvin 9915-90 Green 3160 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
