Order Products : sales@su-jiao.com
Monprene® CP-32023G CLR
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Teknor Apex Company |
| Trademark: | Monprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | uTwscX_Monprene-CP-32023G-CLR.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Monprene®CP-32023G CLR is a thermoplastic elastomer (TPE) material,. This product is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. The processing method is extrusion or injection molding. Typical application areas include:
|
| General Information | |
|---|---|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.868 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (125°C/2.16 kg) | 0.70 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw A | 0 | ASTM D2240 | |
| Shaw OO | 30 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (300% Strain) | 0.172 | MPa | ASTM D412 |
| Tensile Strength (Break) | 0.689 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 750 | % | ASTM D412 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 127 - 160 | °C | |
| Middle Temperature | 149 - 171 | °C | |
| Front Temperature | 160 - 182 | °C | |
| Nozzle Temperature | 182 - 204 | °C | |
| Processing (Melt) Temp | 182 - 204 | °C | |
| Mold Temperature | 35.0 - 48.9 | °C | |
| Injection Pressure | 1.38 - 5.52 | MPa | |
| Injection Rate | Slow-Moderate | ||
| Back Pressure | 0.172 - 0.689 | MPa | |
| Screw Speed | 50 - 100 | rpm | |
| Cushion | 3.81 - 25.4 | mm |
| Injection instructions |
|---|
| 无需干燥。但如果湿度过大，则将粒料在150°F (65°C)的温度下干燥2-4小时。 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 127 - 160 | °C | |
| Cylinder Zone 2 Temp. | 149 - 171 | °C | |
| Cylinder Zone 3 Temp. | 160 - 193 | °C | |
| Cylinder Zone 5 Temp. | 171 - 193 | °C | |
| Die Temperature | 171 - 193 | °C |
| Extrusion instructions |
|---|
| 螺杆转速30 - 100 rpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ultramid® A3EG5 | BASF Corporation | Nylon 66 | Ultramid® |
| Extir® CM Galileo Europa 5 | Versalis S.p.A. | PS (EPS) | Extir® |
| LNP™ THERMOCOMP™ 5C004 compound | SABIC Innovative Plastics | PVDF | LNP™ THERMOCOMP™ |
| MACOMASS TPE MM-TPE-V 5031, R1690 | MACOMASS Verkaufs AG | TPE | MACOMASS TPE |
| Sylvin 29168-75 Clear | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
