Order Products : sales@su-jiao.com
Stat-Tech™ ST-16151-05-02 Black
| Category: | Nylon 66 , Polyamide 66 |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Stat-Tech™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | uQwtBm_Stat-Tech-ST-16151-05-02-Black.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Stat-Tech™Conductive composite materials have anti-static, ESD and RFI/EMI shielding functions in key electronic equipment. These materials combine the advantages of engineering resins and selected reinforcing additives, such as carbon powder, carbon fiber, nickel-plated carbon fiber and stainless steel fiber. According to the application requirements, the conductivity level of these reinforcing additives is from low to high. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.23 | g/cm³ | ASTM D792 |
| Molding Shrinkage | 0.10 - 0.90 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | 110 | MPa | ASTM D638 |
| Flexural Modulus | 6450 | MPa | ASTM D790 |
| Flexural Strength | 172 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 110 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 190 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+3 - 1.0E+6 | ohms | ASTM D257 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | Internal method | ||
| 0.750 mm | V-2 | Internal method | |
| 1.50 mm | V-0 | Internal method | |
| 3.00 mm | V-0 | Internal method |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 - 90.0 | °C | |
| Drying Time | 4.0 - 6.0 | hr | |
| Processing (Melt) Temp | 260 - 280 | °C | |
| Mold Temperature | 65.0 - 85.0 | °C |
| Injection instructions |
|---|
| Injection Pressure: MED-HIGHHold Pressure: MED-HIGHScrew Speed: MODERATEBack Pressure: LOW |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RAYPRENE® NB221-S4089 | R&P (Pte.) Ltd. | TPE | RAYPRENE® |
| Electrafil® PC-50/EC | Techmer Engineered Solutions | PC | Electrafil® |
| Koylene ADL AM018N | Reliance Industries Limited | PP Homopolymer | Koylene ADL |
| LTP PL005 | Chengdu Letian Plastics Co., Ltd | PPS | LTP |
| Optix® CA-75 UVA | Plaskolite, Inc. | Acrylic (PMMA) | Optix® |
