Order Products : sales@su-jiao.com
Matrixx 55S7103
| Category: | PC , Polycarbonate |
| Manufacturer: | The Matrixx Group, Inc. |
| Trademark: | Matrixx |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | uKuhFv_Matrixx-55S7103.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Matrixx 55S7103 is a polycarbonate (PC) material, which contains a 10% glass fiber reinforced material. This product is available in North America,. The main features of Matrixx 55S7103 are:
|
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.26 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (300°C/1.2 kg) | 12 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (3.18 mm) | 0.20 - 0.40 | % | Internal method |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 62.1 | MPa | ASTM D638 |
| Flexural Modulus - Tangent | 3310 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | 130 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, not annealed | 141 | °C | ASTM D648 |
| 1.8 MPa, not annealed | 138 | °C | ASTM D648 |
| RTI | 93.3 | °C | UL 746 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.50 mm | V-0 | UL 94 | |
| 2.50 mm | 5VA | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 121 | °C | |
| Drying Time | 4.0 - 6.0 | hr | |
| Rear Temperature | 282 - 310 | °C | |
| Middle Temperature | 282 - 310 | °C | |
| Front Temperature | 282 - 310 | °C | |
| Processing (Melt) Temp | 293 - 321 | °C | |
| Mold Temperature | 71.1 - 104 | °C | |
| Injection Rate | Slow-Moderate | ||
| Back Pressure | 0.345 - 0.689 | MPa | |
| Cushion | 6.35 - 12.7 | mm |
| Injection instructions |
|---|
| -20°F Dewpoint |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP ESD C 2580 FR | RTP Company | PC+ABS | RTP |
| BCC Resins BC 7136-2 | BCC Products Inc. | Epoxy | BCC Resins |
| Andur 8-3 APLF/Curene® 442 | Anderson Development Company | PUR-Ester/TDI | Andur |
| HiFill® PC GF10 UV BK | Techmer Engineered Solutions | PC | HiFill® |
| Hostacom TRC 787N E1 G14008 | LyondellBasell Industries | PP Copolymer | Hostacom |
