Order Products : sales@su-jiao.com

Lusin® Alro OL 141

Category:	Unspecified , Unspecified
Manufacturer:	Chem-Trend L.P.
Trademark:	Lusin®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	uIlHPS_LusinAlroOL141.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Special Silicone-free Release Agent for Processing Polycarbonates and other Thermoplastic Resins Benefits Approved for PC and ABS For use at mould temperatures up to 140°C (284°F) Injection mould parts can be lacquered or otherwise coated Description Lusin® Alro OL 141 is a silicone-free release agent on the basis of synthetic oils and additives. It is suitable for an application temperature (mould temperature) of up to 140°C (284°F). Lusin® Alro OL 141 is mainly recommended as release agent for stress cracking sensitive polymers like PC and ABS. Typical Properties Appearance of the active ingredient : Liquid, colourless Application A fine even film should be applied to the clean mould; especially to edges and undercuts. For cleaning, we recommend the use of Lusin® L 21 F as mould cleaning agent and Lusin® Clean L 11 or Lusin® Clean L 51 as degreasing agent. Should subsequent treatment of the parts be required, e.g. metal coating, lacquering, etc. we recommend preliminary tests. Residues of the release agent are easily removed by rinsing the parts in a mixture of water and cleaner (e.g. Lusin® Clean W 81).

Message

Special Silicone-free Release Agent for Processing Polycarbonates and other Thermoplastic Resins

Benefits

Approved for PC and ABS

For use at mould temperatures up to 140°C (284°F)

Injection mould parts can be lacquered or otherwise coated

Description
Lusin® Alro OL 141 is a silicone-free release agent on the basis of synthetic oils and additives. It is suitable for an application temperature (mould temperature) of up to 140°C (284°F). Lusin® Alro OL 141 is mainly recommended as release agent for stress cracking sensitive polymers like PC and ABS.

Typical Properties
Appearance of the active ingredient : Liquid, colourless

Application
A fine even film should be applied to the clean mould; especially to edges and undercuts. For cleaning, we recommend the use of Lusin® L 21 F as mould cleaning agent and Lusin® Clean L 11 or Lusin® Clean L 51 as degreasing agent.

Should subsequent treatment of the parts be required, e.g. metal coating, lacquering, etc. we recommend preliminary tests. Residues of the release agent are easily removed by rinsing the parts in a mixture of water and cleaner (e.g. Lusin® Clean W 81).

General Information
Appearance	Colorless
Forms	Liquid

Resin Grade	Manufacturer	Category	Trademark
Ranger PBT PBT-201-G25 291	Beijing Ranger Chemical Co., Ltd.	PBT	Ranger PBT
SILVER® PC2320.L30	Guangdong Silver Age Sci & Tech. Co., Ltd	PC	SILVER®
TRIBOCOMP® PA66 CF30 TS12	EPIC Polymers	Nylon 66	TRIBOCOMP®
Andur 9000 AP/Curene® 442	Anderson Development Company	PUR-Ether/TDI	Andur
KOPA® KN187	Kolon Plastics, Inc.	Nylon 6	KOPA®