Order Products : sales@su-jiao.com
Kafrit PEX TA 1108 HD
| Category: | XLPE , Crosslinked Polyethylene |
| Manufacturer: | Kafrit NA Ltd. |
| Trademark: | Kafrit PEX |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | uEA3GH_Kafrit-PEX-TA-1108-HD.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Cross-linkable Polyethylene Compound TA 1108 HD is for use in residential and commercial applications. TA 1108 HD is primarily used in flexible pipe intended for potable hot and cold water plumbing. It is also used extensively in radiant heating applications. Crosslinked TA 1108 HD has a combination of properties which result in tubing with excellent flexibility, superior mechanical and thermal performance, and outstanding aesthetics. TA 1108 HD is suitable for SDR 9 tubing applications in continuous service at operating conditions of 140°F (60°C) and 80 psi. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.944 | g/cm³ | ASTM D792 |
| Apparent Density | 0.54 | g/cm³ | ASTM D1895, ISO 60 |
| Melt Mass-Flow Rate (MFR) (190°C/5.0 kg) | 2.7 | g/10 min | ASTM D1238 |
| Gel Content | 71 | % | ASTM D2765 |
| Moisture Content 1 | < 0.020 | % |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Volatiles 2 | < 0.10 | % |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Head Temperature | 200 to 210 | °C | |
| Extruder Screw L/D Ratio | 25.0:1.0 | ||
| Extruder Screw Compression Ratio | 3.0:1.0 to 2.5:1.0 | ||
| Extruder Screw Temperature 3 | 70 to 90 | °C |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 20.0 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 300 | % | ASTM D638 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 154 to 177 | °C | |
| Cylinder Zone 2 Temp. | 165 to 188 | °C | |
| Cylinder Zone 3 Temp. | 177 to 200 | °C | |
| Cylinder Zone 4 Temp. | 188 to 200 | °C | |
| Die Temperature | 190 to 215 | °C |
| Note Message | |
|---|---|
| 1 . | Karl Fischer titration (SIL 4.4) |
| 2 . | SIL 4.3 |
| 3 . | Control of the screw temperature may improve processing results. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VECTRA® V143XL | Celanese Corporation | LCP | VECTRA® |
| NPC PE HD-5403GA | NPC Alliance Corporation | HDPE | NPC PE |
| POCAN® T 7323 000000 | LANXESS GmbH | PBT+PET | POCAN® |
| Adflex 7636 XCP | LyondellBasell Industries | Polyolefin, Unspecified | Adflex |
| Sylvin 9772-75 Brown 7211 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
