Order Products : sales@su-jiao.com
NYCOA Polyamide 2084 HS
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | Nycoa (Nylon Corporation of America) |
| Trademark: | NYCOA Polyamide |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | uCO6NV_NYCOA-Polyamide-2084-HS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
NYCOA 2084 HS is a high viscosity resin particularly suitable for extrusion processing. Its melt viscosity and strength provide ease of processing for tubing, profile, and molded articles. This material has been specially formulated with an organic heat stabilizer to eliminate copper iodide extraction in windshield-wiper tubing applications. In addition, the base resin in fully extracted to minimize caprolactam extractables. Typical applications include automotive tubing, windshield washer tubing, and hoses. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.02 | g/cm³ | ASTM D792 |
| Water Absorption (24 hr) | 1.0 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1 | 44.8 | MPa | ASTM D638 |
| Tensile Elongation 2(Break) | 300 | % | ASTM D638 |
| Flexural Modulus 3 | 1000 | MPa | ASTM D790 |
| Flexural Strength 4 | 40.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (6.35 mm) | 850 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 220 | °C | DSC |
| Additional Information |
|---|
| Tensile Elongation at Break, ASTM D638, 2 in/min: 300+%The value listed as Melting Point DSC, was tested in accordance with ASTM D789. |
| Note Message | |
|---|---|
| 1 . | 51 mm/min |
| 2 . | 51 mm/min |
| 3 . | 51 mm/min |
| 4 . | 51 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rilsan® HT CESV BLACK P010 TL | Arkema | PPA | Rilsan® HT |
| RTP 2207 LF | RTP Company | PEEK | RTP |
| RTP 1026 | RTP Company | PBT | RTP |
| Kepex® 3315GFS | Korea Engineering Plastics Co., Ltd | PBT | Kepex® |
| ALTECH® PA6 A 3030/100 GB30 | ALBIS PLASTIC GmbH | Nylon 6 | ALTECH® PA6 |
