Order Products : sales@su-jiao.com

DOW™ HDPE 35057L

Category:	HDPE , High Density Polyethylene Resin
Manufacturer:	The Dow Chemical Company
Trademark:	DOW™ HDPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	u89hHn_DOW-HDPE-35057L.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
HDPE 35057L is a Bimodal High Density Polyethylene intended for Blow Molding applications. This resin exhibit a good balance between stiffness and Environmental Stress Crack Resistance (ESCR). It is especially suitable for the production of bottles, containers and technical hollow articles Applications: Containers for: Household & industrial chemicals (e.g. detergents and softeners) Personal care products and Cosmetics Food products Mineral oils Car care products Toys Automotive parts Complies with: FDA regulation 177.1520(c)3.2a Europe Commission Regulation (EU) No 10/2011 Consult the regulations for complete details.

Message

HDPE 35057L is a Bimodal High Density Polyethylene intended for Blow Molding applications. This resin exhibit a good balance between stiffness and Environmental Stress Crack Resistance (ESCR). It is especially suitable for the production of bottles, containers and technical hollow articles

Applications:

Containers for:

Household & industrial chemicals (e.g. detergents and softeners)

Personal care products and Cosmetics

Food products

Mineral oils

Car care products

Toys

Automotive parts

Complies with:

FDA regulation 177.1520(c)3.2a

Europe Commission Regulation (EU) No 10/2011

Consult the regulations for complete details.

General Information
Agency Ratings	EU No 10/2011 FDA 21 CFR 177.1520(c) 3.2a
Forms	Pellets

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.956	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR)			ASTM D1238
190°C/2.16 kg	0.29	g/10 min
190°C/21.6 kg	27	g/10 min
Environmental Stress-Cracking Resistance (50°C, 100% Igepal, F50)	> 200	hr	ASTM D1693

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D)	66		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength			ASTM D638
Yield	25.0	MPa
Break	38.0	MPa
Tensile Elongation (Break)	950	%	ASTM D638
Flexural Modulus - 2% Secant	860	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C)	130	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Vicat Softening Temperature	128	°C	ASTM D1525

Resin Grade	Manufacturer	Category	Trademark
Spartech Polycom E65450	Spartech Polycom	PVC, Unspecified	Spartech
Supol HT310E	LyondellBasell Industries	PP Copolymer	Supol
NEXT SIGNATURE ABS E35-100HG	NEXT Specialty Resins, Inc.	ABS	NEXT SIGNATURE
Iupiace® AH40	Mitsubishi Engineering-Plastics Corp	PPE+PS	Iupiace®
Plaslube® PA6/6 X	Techmer Engineered Solutions	Nylon 66	Plaslube®