Order Products : sales@su-jiao.com

MELOPAS® MF 152.7

Category:	Mel Formald , Melamine Formaldehyde
Manufacturer:	RASCHIG GmbH
Trademark:	MELOPAS®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	u7SF7t_MELOPAS-MF-152-7.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Cellulose reinforced Melamine moulding compound

Excellent surface hardness, very good UV-stability, very good foodstuff resistance, food safe

Primary application(s): Tableware and cutlery, cooking utensils (ladles, fish slices, spatulas, etc.)

This product meets the allowed upper limits for heavy metals and PCAs and also conforms to the requirements of the EU directives 2002/95 (RoHS), 2002/96 (WEEE) and 2006/122 (PFOS)

Identification according to ISO 14528-1: MF (LD20+MD25), X, N - (LD30+MD15), X, N
DIN 7708: MF 152.7

General Information
Filler / Reinforcement	Cellulose
Features	Food Contact Acceptable Good UV Resistance High Hardness
Uses	Cookware Disposable Tableware
Agency Ratings	EU 2002/96/EC (WEEE) EU 2006/122/EC
RoHS Compliance	RoHS Compliant
Forms	Granules
Processing Method	Compression Molding Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	1.50 to 1.70	g/cm³	ISO 1183
Apparent Density	0.55 to 0.75	g/cm³	ISO 60
Molding Shrinkage - Flow			ISO 2577
-- ¹	0.50 to 1.0	%
-- ²	0.80 to 1.3	%
Water Absorption (23°C, 24 hr)	< 2.0	%	ISO 62
Post Shrinkage ³	1.0 to 1.5	%	ISO 2577

Thermal	Nominal Value	Unit	Test Method
Maximum Service Temperature			IEC 60216
<50 h	160	°C
20,000 h	135	°C

Additional Information	Nominal Value	Unit
Compression Molding Molding Pressure	> 20.0	MPa
Compression Molding Temperature	160 to 180	°C

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus			ISO 527-2
Compression Molded	5000 to 8000	MPa
Injection Molded	5000 to 8000	MPa
Tensile Stress			ISO 527-2
Compression Molded	45.0 to 65.0	MPa
Injection Molded	50.0 to 90.0	MPa
Flexural Modulus			ISO 178
Compression Molded	8000 to 9000	MPa
Injection Molded	8000 to 9000	MPa
Flexural Stress			ISO 178
Compression Molded	90.0 to 120	MPa
Injection Molded	100 to 130	MPa
Compressive Stress	200 to 250	MPa	ISO 604

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179/1eA
Compression Molded	1.4 to 2.0	kJ/m²
Injection Molded	1.5 to 2.0	kJ/m²
Charpy Unnotched Impact Strength			ISO 179/1eU
Compression Molded	6.0 to 9.0	kJ/m²
Injection Molded	8.0 to 14	kJ/m²

Thermal	Nominal Value	Unit	Test Method
Heat Deflection Temperature
1.8 MPa, Unannealed	155 to 180	°C	ISO 75-2/A
8.0 MPa, Unannealed	110 to 130	°C	ISO 75-2/C
CLTE - Flow (50 to 100°C)	1.5E-5 to 3.5E-5	cm/cm/°C	ISO 11359-2
Thermal Conductivity	0.40 to 0.50	W/m/K	ASTM E1461

Electrical	Nominal Value	Unit	Test Method
Surface Resistivity	1.0E+10 to 1.0E+11	ohms	IEC 60093
Volume Resistivity	1.0E+11 to 1.0E+12	ohms·cm	IEC 60093
Electric Strength	15 to 20	kV/mm	IEC 60243-1
Relative Permittivity			IEC 60250
100 Hz	16.0 11.0
1 MHz	9.00 7.00
Dissipation Factor			IEC 60250
100 Hz	0.30 to 0.50
1 MHz	0.030 to 0.050
Arc Resistance	PLC 5		ASTM D495
Comparative Tracking Index	600	V	IEC 60112

Flammability	Nominal Value	Unit	Test Method
Flame Rating (1.50 mm, Tested by RASCHIG)	V-0		UL 94
Glow Wire Flammability Index	960	°C	IEC 60695-2-12
Glow Wire Ignition Temperature	900	°C	IEC 60695-2-13

Injection	Nominal Value	Unit
Middle Temperature	70.0 to 90.0	°C
Front Temperature	90.0 to 100	°C
Processing (Melt) Temp	100 to 115	°C
Mold Temperature	160 to 180	°C
Back Pressure	0.800 to 1.20	MPa
Screw Speed	80 to 120	rpm

Note Message
1 .	Compression Molded
2 .	Injection Molded
3 .	168 h / 110°C

Resin Grade	Manufacturer	Category	Trademark
4MID® 9B22145	4Plas	Nylon 6	4MID®
Nylex™ 4650	Multibase, A Dow Corning Company	Nylon+PP	Nylex™
CONTINUUM™ DGDA-2492N NT	The Dow Chemical Company	HDPE	CONTINUUM™
OmniLon™ PA6 U BK1000	OMNI Plastics, LLC	Nylon 6	OmniLon™
ALFATER XL® A85I 2UV0000	ALBIS PLASTIC GmbH	TPV	ALFATER XL®