Order Products : sales@su-jiao.com
Qenos PE MD0898
| Category: | MDPE , Medium Density Polyethylene |
| Manufacturer: | Qenos Pty Ltd |
| Trademark: | Qenos PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | u4UI9y_Qenos-PE-MD0898.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
MD0898 is a black, high molecular weight PE80 MDPE co-polymer, developed as a general purpose resin for use in pressure and non-pressure pipes, where service life to 100 years is required. MD0898 offers excellent chemical resistance and slow crack growth resistance. MD0898 will provide excellent resistance to the effects of ultra-violet light exposure in outdoor applications due to well dispersed carbon black. MD0898 has been designed for extrusion into a full range of pipes, where medium density, PE80 Type B resins are required. MD0898 is suitable for use in the transport of a wide range of fluids for industrial, rural and mining applications, including potable water. Suitability for use in any application should be determined by appropriate performance testing. MD0898 complies to AS/NZS 4131 2010 for PE80 Type B pipe compounds. It is intended to be used in pipes conforming to AS/NZS 4130. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.952 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/21.6 kg | 15 | g/10 min | |
| 190°C/5.0 kg | 0.70 | g/10 min |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 61 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1(1.90 mm) | 900 | MPa | ASTM D638 |
| Tensile Strength 2 | ASTM D638 | ||
| Yield, 1.90 mm | 21.0 | MPa | |
| Break, 1.90 mm | 32.0 | MPa | |
| Tensile Elongation 3(Break, 1.90 mm) | 900 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 4 | 820 | MPa | ASTM D790 |
| Note Message | |
|---|---|
| 1 . | Type IV, 50 mm/min |
| 2 . | Type IV, 50 mm/min |
| 3 . | Type IV, 50 mm/min |
| 4 . | 13 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris PC GN5002TF | Sincerity Australia Pty Ltd. | PC | Sindustris PC |
| TPSiV™ 4000-80A | Multibase, A Dow Corning Company | TPSiV | TPSiV™ |
| Delta N6-100 | Delta Polymers | Nylon 6 | Delta |
| Iupilon® MB4405U | Mitsubishi Engineering-Plastics Corp | PC+Polyester | Iupilon® |
| Pro-fax SC973 | LyondellBasell Industries | PP Impact Copolymer | Pro-fax |
