Order Products : sales@su-jiao.com
KOPEL® KP3340
| Category: | TPEE , Thermoplastic Polyester Elastomer |
| Manufacturer: | Kolon Plastics, Inc. |
| Trademark: | KOPEL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | u4BW2d_KOPEL-KP3340.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| KOPEL® KP3340 is a Thermoplastic Polyester Elastomer (TPEE) product. It is available in Asia Pacific, Europe, Latin America, or North America. Primary characteristic: flame rated. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.15 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (200°C/2.16 kg) | 17 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 1.1 | % | ASTM D955 |
| Water Absorption (Equilibrium, 23°C, 60% RH) | 0.70 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 40 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 20.6 | MPa | ASTM D638 |
| Tensile Elongation (Yield, 23°C) | 920 | % | ASTM D638 |
| Flexural Modulus (23°C) | 95.1 | MPa | ASTM D790 |
| Taber Abrasion Resistance (1000 Cycles, CS-17 Wheel) | 3.00 | mg | ASTM D1044 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -40°C | No Break | ||
| 23°C | No Break |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 65.0 | °C | ASTM D648 |
| Brittleness Temperature | < -70.0 | °C | ASTM D746 |
| Peak Melting Temperature | 170 | °C | ASTM D3418 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Resilience | 67 | % |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCHULAMID® 6 NV SI | A. Schulman Europe | Nylon 6 | SCHULAMID® |
| WPP TPO TPO-2561 P Black | Washington Penn Plastic Co. Inc. | TPO | WPP TPO |
| Chemical Resources PA66101 | Chemical Resources, Inc. | Nylon 66 | Chemical Resources |
| Chemical Resources PMMA1400 | Chemical Resources, Inc. | Acrylic (PMMA) | Chemical Resources |
| Sylvin 5170-85 Green 3209 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
