Order Products : sales@su-jiao.com
Braskem PE PB-208
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Braskem |
| Trademark: | Braskem PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | u3Tbbh_Braskem-PE-PB-208.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Description: PB208 is a low density polyethylene with no additives. This grade shows excellent processability being indicated for low viscosity required applications. Injection molded products with this resin shows good flow and flexibility properties. Additive: No additives present Applications: Masterbatches; Covers and injected parts with large flat area. Process: Injection Molding |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.923 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 22 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance (50°C, 2.00 mm, 100% Igepal, Compression Molded, F50) | 6.00 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 42 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield, Compression Molded | 10.0 | MPa | |
| Break, Compression Molded | 6.00 | MPa | |
| Tensile Elongation (Break, Compression Molded) | 140 | % | ASTM D638 |
| Flexural Modulus - 1% Secant (Compression Molded) | 700 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 87.0 | °C | ASTM D1525 1 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 160 to 230 | °C | |
| Mold Temperature | 5.00 to 25.0 | °C |
| Note Message | |
|---|---|
| 1 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| UBESTA 3030 JFX3 | UBE Engineering Plastics, S.A. | Nylon 12 | UBESTA |
| Ultramid® C33 L | BASF Corporation | Nylon 66/6 | Ultramid® |
| INEOS HDPE K44-08-122 | INEOS Olefins & Polymers USA | HDPE Copolymer | INEOS HDPE |
| Lupolen 5261 Z Q 456 B | LyondellBasell Industries | HDPE | Lupolen |
| POLYfill PPH GF4030 PD2 | Polykemi AB | PP Homopolymer | POLYfill |
