Order Products : sales@su-jiao.com
INSULGEL 50 FC Black
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | ITW Polymers Coatings North America |
| Trademark: | INSULGEL |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ttQCgi_INSULGEL-50-FC-Black.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| INSULGEL 50 FC Black is a room temperature curing epoxy gel. It is low in viscosity and does not normally require vacuum de-gassing to assure bubble-free castings. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Durometer Hardness (Shore A) | 50 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 4.14 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 150 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| CLTE - Flow | 4.5E-5 | cm/cm/°C | |
| Thermal Conductivity | 0.23 | W/m/K | |
| Service Temperature | 105 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+14 | ohms·cm | ASTM D257 |
| Dielectric Strength | 17 | kV/mm | ASTM D149 |
| Dielectric Constant (1 kHz) | 3.50 | ASTM D150 | |
| Dissipation Factor (1 kHz) | 0.020 | ASTM D150 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Part A | Mix Ratio by Weight: 100 | ||
| Part B | Mix Ratio by Weight: 25 | ||
| Shelf Life (25°C) | 52 | wk |
| Uncured Properties | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Color | |||
| -- 1 | Amber | ||
| -- 2 | Black | ||
| Density | |||
| -- 3 | 0.948 | g/cm³ | |
| -- 4 | 1.05 | g/cm³ | |
| Viscosity | ASTM D2393 | ||
| -- 5 | 0.30 | Pa·s | |
| -- 6 | 0.50 | Pa·s | |
| -- 7 | 0.55 | Pa·s | |
| Curing Time (25°C) | 24 | hr | |
| Pot Life (25°C) | 10 | min |
| Note Message | |
|---|---|
| 1 . | Part B |
| 2 . | Part A |
| 3 . | Part B |
| 4 . | Part A |
| 5 . | Part B |
| 6 . | Mixed |
| 7 . | Part A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Adell Polyolefin ZR-17 | Adell Plastics, Inc. | Polyolefin, Unspecified | Adell Polyolefin |
| ALAMID® 6.6 GF 30 H | LEIS Polytechnik - polymere Werkstoffe GmbH | Nylon 66 | ALAMID® |
| ASTAMID™ MA3EG7 | Marplex Australia Pty. Ltd. | Nylon 66 | ASTAMID™ |
| DIAMALOY ABSPC 754M | Network Polymers, Inc. | PC+ABS | DIAMALOY ABSPC |
| Gallonprene® GP520-7509 | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
