Order Products : sales@su-jiao.com

VICOTE® F808 Natural

Category:	PEEK , Polyetheretherketone
Manufacturer:	Victrex plc
Trademark:	VICOTE®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	tnsgSu_VICOTE-F808-Natural.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
The VICOTE F808 natural, F809 natural and F810Blk grades have been specifically formulated to provide a resilient coating with high wear and abrasion resistance combined with excellent release properties on ferrous substrates such as carbon and cast steels. These properties are retained at high temperatures where other release coatings would potentially fail. VICOTE dispersions have a low level of extractables. Contact Victrex for further details. VICOTE F808 natural, F809 natural and F810Blk dispersions are aqueous based however there are small amounts of solvents present. Refer to the appropriate MSDS sheet for details. The VICTREX® PEEK polymer contained in the VICOTE dispersions like other non-coating grades of VICTREX PEEK polymer are thermoplastic in nature and exhibit flow above the melt temperature. When processed using the correct guidelines the coatings will exhibit the excellent properties that VICTREX PEEK polymer is renowned for. VICOTE products have excellent chemical resistance. Consult the Victrex Chemical Resistance Data brochure for further details.

Message

The VICOTE F808 natural, F809 natural and F810Blk grades have been specifically formulated to provide a resilient coating with high wear and abrasion resistance combined with excellent release properties on ferrous substrates such as carbon and cast steels. These properties are retained at high temperatures where other release coatings would potentially fail. VICOTE dispersions have a low level of extractables. Contact Victrex for further details.

VICOTE F808 natural, F809 natural and F810Blk dispersions are aqueous based however there are small amounts of solvents present. Refer to the appropriate MSDS sheet for details.

The VICTREX® PEEK polymer contained in the VICOTE dispersions like other non-coating grades of VICTREX PEEK polymer are thermoplastic in nature and exhibit flow above the melt temperature. When processed using the correct guidelines the coatings will exhibit the excellent properties that VICTREX PEEK polymer is renowned for.

VICOTE products have excellent chemical resistance. Consult the Victrex Chemical Resistance Data brochure for further details.

General Information
Features	Good Abrasion Resistance Good Chemical Resistance Good Wear Resistance High Heat Resistance Low Extractables Resilient
Uses	Coating Applications
Agency Ratings	FDA 21 CFR 175.300
Appearance	Natural Color
Forms	Liquid
Processing Method	Coating Spraying

Mechanical	Nominal Value		Test Method
Coefficient of Friction ¹	0.10		ASTM G133

Additional Information	Nominal Value	Unit	Test Method
Cross Hatch Adhesion ²			ISO 2409
Aluminum	0
Mild Steel	0
Stainless Steel	0
Direct Impact ³			ISO 6272
Height	100.00	cm
Indentation depth	0.50	cm
Weight	2000	g
Konig Hardness (40.0 to 50.0 µm)	2.8	min	ISO 1522

Note Message
1 .	Using 250N Load, µm @ 10 min
2 .	Rating 0 to 5
3 .	Part 1

Resin Grade	Manufacturer	Category	Trademark
PRIMALLOY® A1602	Mitsubishi Chemical Performance Polymers, Inc.	TPE	PRIMALLOY®
TEKNILID WPSPPE	Tekni-Films, a div of Tekni-Plex	Film, Coated Al Foil	TEKNILID
WPP PP PPC3GF1.5UV-MS 428 Black	Washington Penn Plastic Co. Inc.	PP Copolymer	WPP PP
Hanwha Total PP FB53	HANWHA TOTAL PETROCHEMICALS Co., Ltd.	PP, Unspecified	Hanwha Total PP
INEOS Wire & Cable BPD3642	INEOS Olefins & Polymers Europe	LLDPE	INEOS Wire & Cable