Order Products : sales@su-jiao.com
Desmopan® DP 1050D
| Category: | TPU, Unspecified , Thermoplastic Polyurethane Elastomer |
| Manufacturer: | Covestro - PUR |
| Trademark: | Desmopan® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | tnpFDq_Desmopan-DP-1050D.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| injection molding grade; hydrolysis-stabilised; high mechanical strength; very short cycle times; Injection molded engineering parts; Rollers; Ear-tags; Shoe heels |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 1.23 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness | ISO 868 | ||
| Shore A, 23°C | 96 | ||
| Shore D, 23°C | 51 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Abrasion Resistance (23°C) | 13.0 | mm³ | ISO 4649-A |
| Tensile Storage Modulus | ISO 6721-1,-4 | ||
| -20°C | 1.22 | GPa | |
| 20°C | 0.204 | GPa | |
| 60°C | 0.0760 | GPa |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Impact Resilience (23°C) | 36 | % | ISO 4662 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1 | DIN 53504 | ||
| 100% Strain, 23°C | 15.7 | MPa | |
| 300% Strain, 23°C | 30.0 | MPa | |
| Tensile Stress 2(Break, 23°C) | 50.0 | MPa | DIN 53504 |
| Tensile Elongation 3(Break, 23°C) | 480 | % | DIN 53504 |
| Tear Strength 4(23°C) | 150 | kN/m | ISO 34-1 |
| Compression Set | ISO 815 | ||
| 23°C, 72 hr | 27 | % | |
| 70°C, 24 hr | 38 | % |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | < 110 | °C | |
| Processing (Melt) Temp | 210 to 230 | °C | |
| Mold Temperature | 20.0 to 40.0 | °C |
| Note Message | |
|---|---|
| 1 . | 200 mm/min |
| 2 . | 200 mm/min |
| 3 . | 200 mm/min |
| 4 . | 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Zytel® 73G45L NC010 | DuPont Performance Polymers | Nylon 6 | Zytel® |
| Dryflex® A1 602801 | ELASTO | SEBS | Dryflex® |
| Dynacom 401-G15 | Dynachem Co. Ltd. | Nylon 6 | Dynacom |
| EPLAMID 66 GFS 30 HS NC | EPSAN Plastik SAN. ve TiC. A.S. | Nylon 66 | EPLAMID 66 |
| HiFill FR® ABS GB10 FR | Techmer Engineered Solutions | ABS | HiFill FR® |
