Order Products : sales@su-jiao.com
TECATRON™ PVX
| Category: | PPS , Polyphenylene Sulfide |
| Manufacturer: | Ensinger Inc. |
| Trademark: | TECATRON™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | tnR2eR_TECATRON-PVX.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
TECATRON™ PPS is a high performance thermoplastic that combines good mechanical properties with excellent thermal and chemical resistance properties. There is no known solvent that dissolves TECATRON™ PPS at temperatures below 392°F. Its low ionic impurities make it an excellent choice for applications where high purity is a concern. TECATRON™ GF40 is a glass reinforced material that offers extremely high strength along with excellent chemical resistance properties. TECATRON™ PVX is a bearing grade PPS that is suitable for high load applications. TECATRON™ PPS's excellent thermal and chemical resistance along with its ionic impurities make an excellent choice for applications requiring low outgassing and high purity. TECATRON™PPS is typically used in the automotive, electrical/ electronic, industrial, mechanical, appliance and semiconductor industries. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.47 | g/cm³ | ASTM D792 |
| Water Absorption (23°C, 24 hr) | 0.020 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 9510 | MPa | ASTM D638 |
| Tensile Strength (Break, 23°C) | 100 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 1.5 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature | 282 | °C | ASTM D2133 |
| CLTE - Flow | 1.7E-5 | cm/cm/°C | ASTM D696 |
| Maximum Service Temperature | |||
| Intermittent | 260 | °C | |
| Long Term | 230 | °C | UL 746B |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | 1.0E+6 | ohms | ASTM D257 |
| Volume Resistivity | 1.0E+6 | ohms·cm | ASTM D257 |
| Dielectric Constant 1(23°C, 60 Hz) | 3.00 | ASTM D150 | |
| Dissipation Factor (23°C, 60 Hz) | 1.0E-4 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 |
| Additional Information |
|---|
| Data obtained from extruded shapes material. |
| Note Message | |
|---|---|
| 1 . | 50% RH |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 8870-70D Natural | Sylvin Technologies Incorporated | PVC, Semi-Rigid | Sylvin |
| ALCOM® PC 740/4 GY1177-05LD | ALBIS PLASTIC GmbH | PC | ALCOM® PC |
| Formolene® 6535N | Formosa Plastics Corporation, U.S.A. | PP Impact Copolymer | Formolene® |
| Lustran® ABS 266 | INEOS ABS (USA) | ABS | Lustran® ABS |
| OmniCarb™ PC220 | OMNI Plastics, LLC | PC | OmniCarb™ |
