Order Products : sales@su-jiao.com
Formolene® 2302E
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Formosa Plastics Corporation, U.S.A. |
| Trademark: | Formolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | tmTUgB_Formolene-2302E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Formolene® 2302E is a low flow, medium impact polypropylene copolymer designed for extrusion applications. It is a barefoot resin with a basic stabilization package. Potential applications include thermoforming and corrugated sheet which require good surface characteristics for high quality printing. Formolene® 2302E meets all requirements of the U. S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles and components of articles intended for direct food contact. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 1.7 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 27.6 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield) | 9.0 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3 | 1170 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 210 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 90.0 | °C | ASTM D648 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Precision Polymer V75SR | Precision Polymer Engineering Ltd. | Fluorelastomer | Precision Polymer |
| Thermoset Plastics 286 | Thermoset, Lord Chemical Products | Epoxy | Thermoset Plastics |
| BMC T15(GPS) | Bulk Molding Compounds, Inc. | Polyester, TS | BMC |
| Geon™ 130 Series 138 | Mexichem Specialty Resins, Inc. | PVC Copolymer | Geon™ 130 Series |
| EPAMOULD 250D12 | Epaflex Polyurethanes S.R.L. | TPU-Polyester | EPAMOULD |
