Order Products : sales@su-jiao.com
Ketron® PEEK-GF30 LSG
| Category: | PEEK , Polyetheretherketone |
| Manufacturer: | Quadrant Engineering Plastic Products |
| Trademark: | Ketron® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | tk8yvy_Ketron-PEEK-GF30-LSG.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| KETRON® PEEK-GF30 LSG blue stock shapes are produced from genuine VICTREX® PEEK polymer. This 30% glass fibre reinforced grade combines higher stiffness and creep resistance than KETRON PEEK LSG with a much better dimensional stability. KETRON PEEK-GF30 LSG blue stock shapes have also been successfully type tested for their compliance with both United States Pharmacopeia (USP) and ISO 10993-1 guideline requirements for Biocompatibility Testing of Materials, and they come with full traceability from resin to stock shape. These features, added to an excellent sterilizability by means of steam, dry heat, ethylene oxide, plasma and gamma irradiation, make KETRON PEEK -CA30 LSG stock shapes very suitable for applications in the medical, pharmaceutical and biotechnology markets. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.51 | g/cm³ | ISO 1183 |
| Water Absorption | ISO 62 | ||
| Saturation, 23°C | 0.10 | % | |
| Equilibrium, 23°C, 50% RH | 0.050 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale) | 100 | ISO 2039-2 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 7000 | MPa | ISO 527-2 |
| Tensile Stress (Break) | 87.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 3.0 | % | ISO 527-2 |
| Flexural Stress | 155 | MPa | ISO 178 |
| Compressive Stress (5% Strain) | 155 | MPa | ISO 604 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 230 | °C | ISO 75-2/A |
| Continuous Use Temperature 1 | 250 | °C | |
| Melting Temperature | 340 | °C | ISO 11357-3 |
| CLTE - Flow (23 to 150°C) | 3.0E-4 | cm/cm/°C | |
| Thermal Conductivity | 0.43 | W/m/K |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | > 1.0E+13 | ohms | IEC 60093 |
| Electric Strength | 24 | kV/mm | IEC 60243-1 |
| Dielectric Constant (1 MHz) | 3.60 | IEC 60250 | |
| Dissipation Factor (1 MHz) | 2.0E-3 | IEC 60250 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 |
| Note Message | |
|---|---|
| 1 . | Long term in Air |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tecnoprene® VK6 HIT1 NERO900 | SO.F.TER. SPA | PP Homopolymer | Tecnoprene® |
| APEX® SRF 3705 | Teknor Apex Company | PVC, Rigid | APEX® |
| LNP™ THERMOCOMP™ UF0069S compound | SABIC Innovative Plastics | PPA | LNP™ THERMOCOMP™ |
| PC-COM™ PC415-50 | Polymer Compounders Limited | PC | PC-COM™ |
| POLYfill PPH TS4040 | Polykemi AB | PP Homopolymer | POLYfill |
