Order Products : sales@su-jiao.com
Generic PI, TS
| Category: | PI, TS , Thermoset Polyimide |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | tgUArp_Generic-PI-TS.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic PI, TS This information is provided for comparative purposes only. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | |||
| -- | 1.34 to 1.87 | g/cm³ | ASTM D792 |
| -- | 1.42 to 1.53 | g/cm³ | ASTM D1505 |
| Water Absorption (23°C, 24 hr) | 0.080 to 2.9 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Elongation (Break, 23°C) | 4.0 to 8.0 | % | ASTM D638 |
| Flexural Modulus (23°C) | 2550 to 3220 | MPa | ASTM D790 |
| Flexural Strength (23°C) | 58.6 to 254 | MPa | ASTM D790 |
| Compressive Strength (23°C) | 20.7 to 237 | MPa | ASTM D695 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 24 to 78 | µm | |
| Secant Modulus - MD | 2790 to 3170 | MPa | ASTM D882 |
| Tensile Strength - MD (Break) | 192 to 241 | MPa | ASTM D882 |
| Tensile Elongation - MD (Break) | 72 to 95 | % | ASTM D882 |
| Elmendorf Tear Strength - MD | 6.8 to 38 | g | ASTM D1922 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 18 to 77 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| CLTE - Flow | 2.6E-5 to 4.9E-5 | cm/cm/°C | ASTM D696 |
| RTI Elec | 130 to 240 | °C | UL 746 |
| RTI Str | 130 to 210 | °C | UL 746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (23°C) | 4.0E+12 to 5.8E+15 | ohms·cm | ASTM D257 |
| Dielectric Strength (23°C) | 15 to 310 | kV/mm | ASTM D149 |
| Dielectric Constant (23°C) | 2.95 to 3.45 | ASTM D150 | |
| Dissipation Factor (23°C) | 8.0E-4 to 2.1E-3 | ASTM D150 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PrimaFlex® RP 5501-C | Plastic Solutions, Inc. | PP Random Copolymer | PrimaFlex® |
| RECLAIR® R 35042 | Reliance Industries Limited | MDPE | RECLAIR® |
| Sanren Y600 (On-spec.) | SINOPEC Shanghai Petrochemical Co. Ltd. | PP Homopolymer | Sanren |
| Lucon® PS6080EX | LG Chem Ltd. | ABS | Lucon® |
| OPTUM® DPP30WF08AL | Ferro Corporation | Polyolefin, Unspecified | OPTUM® |
