Order Products : sales@su-jiao.com
Estane® 58271 TPU
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | Lubrizol Advanced Materials, Inc. |
| Trademark: | Estane® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | tfkwuL_Estane-58271-TPU.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Type: Polyester Thermoplastic Polyurethane (TPU) Special Feature: Good physical properties with chemical resistance and adhesive properties. Wide extrusion processing window Processes: Extrusion: Blown, Flat Die Cast Film, Injection and Blow Molding |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.21 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 85 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Taber Abrasion Resistance (1000 Cycles, 1000 g, H-18 Wheel) | 34.0 | mg | ASTM D3389 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Set (200% Strain) | 13 | % | ASTM D412 |
| Tensile Stress | ASTM D412 | ||
| 100% strain, 0.762mm | 5.50 | MPa | ASTM D412 |
| 300% strain, 0.762mm | 9.70 | MPa | ASTM D412 |
| Tensile Strength (Break, 0.762 mm) | 51.7 | MPa | ASTM D412 |
| Tensile Elongation (Break, 0.762 mm) | 540 | % | ASTM D412 |
| Tear Strength | |||
| 0.762 mm 1 | 78.5 | kN/m | ASTM D624 |
| Cracking | 23 | kN/m | ASTM D470 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | -25.0 | °C | ASTM D3418 |
| Melting Temperature | 120 | °C | DSC |
| Kofler Melting Temperature | 115 | °C | Internal method |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Haze 2(1650 µm) | 1.1 | % | ASTM D1003 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 104 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Suggested Max Moisture | 0.020 | % | |
| Cylinder Zone 1 Temp. | 177 | °C | |
| Cylinder Zone 2 Temp. | 182 | °C | |
| Cylinder Zone 3 Temp. | 188 | °C | |
| Cylinder Zone 4 Temp. | 193 | °C | |
| Adapter Temperature | 193 | °C | |
| Melt Temperature | 191 | °C | |
| Die Temperature | 193 | °C |
| Extrusion instructions |
|---|
| Screens: 20-40-80 meshDew Point: -40°C |
| Note Message | |
|---|---|
| 1 . | C mould |
| 2 . | between glass |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| DENILUB N 00U 2GR | Vamp Tech | Nylon 6 | DENILUB |
| Fiberfil® PP-61/V2 | Fiberfil® Engineered Plastics Inc. | PP Copolymer | Fiberfil® |
| Hostaform® EC270TX | Celanese Corporation | Acetal (POM) Copolymer | Hostaform® |
| LUVOCOM® 1105-8344/GY | Lehmann & Voss & Co. | PEEK | LUVOCOM® |
| ELEVATE™ EB508AA | Westlake Chemical Corporation | EVA | ELEVATE™ |
