Order Products : sales@su-jiao.com
EPIGUM DPE/45
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | Crosspolimeri S.p.A. |
| Trademark: | EPIGUM |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | tasBFD_EPIGUM-DPE-45.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
EPIGUM DPE/45 is a thermoplastic elastomer EPIGUM DPE/45 is a dynamically crosslinked thermoplastic vulcanizate (TPV). |
| General Information | |
|---|---|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.950 | g/cm³ | ASTM D792 |
| Moisture | 0.030 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 47 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 3.00 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 390 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Compression Set (100°C, 22 hr) | 11 | % | ASTM D395B |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 to 90.0 | °C | |
| Drying Time | 2.0 to 3.0 | hr | |
| Cylinder Zone 1 Temp. | 180 | °C | |
| Cylinder Zone 2 Temp. | 185 | °C | |
| Cylinder Zone 3 Temp. | 190 | °C | |
| Cylinder Zone 4 Temp. | 200 | °C | |
| Cylinder Zone 5 Temp. | 215 | °C | |
| Die Temperature | 220 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sofprene T® 540200A40 | SO.F.TER. SPA | SBS | Sofprene T® |
| SLOVAMID® 6 GF 50 | Plastcom | Nylon 6 | SLOVAMID® 6 |
| STERLENE™ CMW402 | R&P (Pte.) Ltd. | TPO (POE) | STERLENE™ |
| MARPOL® Homo 7.0 | Marco Polo International, Inc. | PP Homopolymer | MARPOL® Homo |
| DAI-EL™ G-701 | DAIKIN AMERICA, INC. | Fluorelastomer | DAI-EL™ |
