Order Products : sales@su-jiao.com
KRATON® D2109 DS-N
| Category: | SBS , Styrene Butadiene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | taOUw8_KRATON-D2109-DS-N.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton D2109 DS-N is an easy processing, general purpose 45 Shore A hardness material designed for a wide variety of applications. It is supplied from North America in the physical form identified below.
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.915 to 0.945 | g/cm³ | Internal Method |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 15 to 30 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 2.5 to 2.7 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 120°C, Compression Molded) | 40 to 50 | Internal Method |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1 | ASTM D412 | ||
| Across Flow : 100% Strain | 1.03 | MPa | |
| Flow : 100% Strain | 1.03 | MPa | |
| Across Flow : 300% Strain | 2.07 | MPa | |
| Flow : 300% Strain | 2.07 | MPa | |
| Tensile Strength 2 | ASTM D412 | ||
| Across Flow : Yield | 4.83 | MPa | |
| Flow : Yield | 4.83 | MPa | |
| Tensile Elongation 3 | ASTM D412 | ||
| Across Flow : Break | 550 | % | |
| Flow : Break | 550 | % | |
| Tear Strength 4 | ASTM D624 | ||
| Across Flow | 21.9 | kN/m | |
| Flow | 21.9 | kN/m |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 171 to 182 | °C | |
| Front Temperature | 188 to 199 | °C | |
| Nozzle Temperature | 177 to 193 | °C | |
| Mold Temperature | 10.0 to 37.8 | °C | |
| Injection Pressure | 3.45 to 4.83 | MPa | |
| Injection Rate | Moderate-Fast | ||
| Back Pressure | 0.276 to 0.414 | MPa |
| Note Message | |
|---|---|
| 1 . | Die C |
| 2 . | Die C |
| 3 . | Die C |
| 4 . | Die C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SuperLite® SL550700-100 (1.5mm) | Azdel, Inc. | PP, Unspecified | SuperLite® |
| Ultramid® A3WG5 BK00564 | BASF Corporation | Nylon 66 | Ultramid® |
| ALCOM® PC 740/1.1 CF10 PTFE15 | ALBIS PLASTIC GmbH | PC | ALCOM® PC |
| Bergamid™ A700 | PolyOne Corporation | Nylon 66 | Bergamid™ |
| Duron PEI 1010 | ProPolymers Inc. | PEI | Duron |
