Order Products : sales@su-jiao.com
S&E Wire & Cable GTPO8102/R
| Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
| Manufacturer: | S&E Specialty Polymers, LLC |
| Trademark: | S&E Wire & Cable |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | tWfose_S-E-Wire-Cable-GTPO8102-R.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
An olefin based insulation and jacketing compound formulated to meet the UL VW-1 Standard and CSA test C22-2 No. 0.6 flame test. |
| General Information | |
|---|---|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.26 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 1.0 to 5.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 95 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 13.1 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 600 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (200% Strain) | 0.0484 | MPa | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -25.0 | °C | ASTM D746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+16 | ohms·cm | ASTM D229 |
| Dielectric Constant | 2.40 | ASTM D1531 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 27 | % | ASTM D2863 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rilsan® BESNO P20 TL | Arkema | Nylon 11 | Rilsan® |
| Laprene® 8K1000A80 | SO.F.TER. SPA | SEBS | Laprene® |
| LUVOCOM® 1105-8160 | Lehmann & Voss & Co. | PEEK | LUVOCOM® |
| OP - PC - Unfilled GR912-VO | Oxford Polymers | PC | OP - PC - Unfilled |
| POLYfill PPH GF12030 PD2 | Polykemi AB | PP Homopolymer | POLYfill |
