Order Products : sales@su-jiao.com

KMI PP KM-085IB

Category:	PP Impact Copolymer , Polypropylene Impact Copolymer
Manufacturer:	KMI Group, Inc.
Trademark:	KMI PP
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	tV7gBC_KMIPPKM085IB.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
KM-085IB is a block copolymer polypropylene resin for injection molding applications. This grade has high ethylene-propylene rubber content. This grade is specifically designed to give high impact resistance. In addition, as other HIPP grades, rigidity and melt flowability of this grade is superior to those of compounded TPO resins with equivalent rubber content. Characteristics: High impact resistance -> Outstanding low temperature impact High rigidity -> Small deformation under load Good melt flowability -> Molding at lower temperature

Message

KM-085IB is a block copolymer polypropylene resin for injection molding applications. This grade has high ethylene-propylene rubber content. This grade is specifically designed to give high impact resistance. In addition, as other HIPP grades, rigidity and melt flowability of this grade is superior to those of compounded TPO resins with equivalent rubber content.

Characteristics:

High impact resistance -> Outstanding low temperature impact

High rigidity -> Small deformation under load

Good melt flowability -> Molding at lower temperature

General Information
Features	Block Copolymer Rigidity, high Impact copolymer Impact resistance, high Good liquidity Low temperature impact resistance
Processing Method	Injection molding

Physical	Nominal Value	Unit	Test Method
Density	0.910	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	10	g/10 min	ASTM D1238

Hardness	Nominal Value	Unit	Test Method
Rockwell Hardness (R-Scale)	70		ASTM D785

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength (Yield)	22.6	MPa	ASTM D638
Tensile Elongation (Break)	200	%	ASTM D638
Flexural Modulus	1080	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Unnotched Izod Impact (23°C)	290	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Heat Distortion	100	°C	ASTM D648

Resin Grade	Manufacturer	Category	Trademark
Varcum 94635LV	Durez Corporation	Phenolic	Varcum
BESTNYL SI00VI02BU	Triesa Plastics	Nylon 6	BESTNYL
Eltex® B4020N1332	INEOS Olefins & Polymers Europe	HDPE Copolymer	Eltex®
Kumho ASA XC180	Korea Kumho Petrochemical Co., Ltd.	ASA	Kumho ASA
LNP™ THERMOCOMP™ RF006XXH compound	SABIC Innovative Plastics	Nylon 66	LNP™ THERMOCOMP™