Order Products : sales@su-jiao.com
Tool-A-Thane UT-305
| Category: | PUR, Unspecified , Polyurethane |
| Manufacturer: | Urethane Tooling & Engineering Corp |
| Trademark: | Tool-A-Thane |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | tTgduR_Tool-A-Thane-UT-305.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
| General Information | |
|---|---|
| Uses |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 1.21 | g/cm³ | |
| Molding Shrinkage - Flow | 1.4 | % |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Durometer Hardness (Shore A) | 35 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Coefficient of Friction 1(vs. Steel - Dynamic) | > 0.80 | ||
| Abrasion Resistance - NBS Index | < 50.0 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Graves Tear | 7.5 | kN/m |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Penetration Depth - Recommended for optimum life | 40 | % |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | |||
| 100% Strain | 0.290 | MPa | |
| 300% Strain | 0.414 | MPa | |
| Tensile Elongation (Break) | > 800 | % | |
| Tear Strength (Split) | 1.1 | kN/m | ASTM D470 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Brittleness Temperature | -67.8 | °C |
| Note Message | |
|---|---|
| 1 . | at 20 lbs load at 52 fpm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RABALON® T331C | Mitsubishi Chemical Performance Polymers, Inc. | TPE | RABALON® |
| Novalloy-B B5723 | PlastxWorld Inc. | ABS+PBT | Novalloy-B |
| Hyflon® PFA C920-0020X | Solvay Specialty Polymers | PFA | Hyflon® PFA |
| OP - PC - Filled/Lubricated 15 PTFE-30GF | Oxford Polymers | PC | OP - PC - Filled/Lubricated |
| PONACOM PS 5380 | Ponachem Compound GmbH | PS (HIPS) | PONACOM PS |
