Category: | PBT , Polybutylene Terephthalate |
Manufacturer: | RTP Company |
Trademark: | RTP |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | tR44qv_RTP-1099-X-115081-E.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
Carbon Nanotube - ESD Protection |
General Information | |
---|---|
Filler / Reinforcement |
|
Features |
|
RoHS Compliance |
|
Processing Method |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Specific Gravity | 1.34 | g/cm³ | ASTM D792 |
Molding Shrinkage - Flow (3.20 mm) | 0.20 - 0.30 | % | ASTM D955 |
Moisture Content | 0.030 | % |
Electrical | Nominal Value | Unit | Test Method |
---|---|---|---|
Static Decay | sec | FTMS 101C 4046.1 |
Mechanical | Nominal Value | Unit | Test Method |
---|---|---|---|
Tensile Modulus | 3450 | MPa | ASTM D638 |
Tensile Strength | 60.7 | MPa | ASTM D638 |
Tensile Elongation (Yield) | 5.0 | % | ASTM D638 |
Flexural Modulus | 3100 | MPa | ASTM D790 |
Flexural Strength | 107 | MPa | ASTM D790 |
Electrical | Nominal Value | Unit | Test Method |
---|---|---|---|
Surface Resistivity | |||
-- | 1.0E+4 - 1.0E+6 | ohms | ASTM D257 |
-- | 1.0E+3 - 1.0E+5 | ohms | ESD STM11.11 |
Volume Resistivity | 10 - 1.0E+2 | ohms·cm | ASTM D257 |
Injection | Nominal Value | Unit | |
---|---|---|---|
Drying Temperature | 121 | °C | |
Drying Time | 4.0 | hr | |
Dew Point | -28.9 | °C | |
Processing (Melt) Temp | 238 - 271 | °C | |
Mold Temperature | 79.4 - 107 | °C | |
Injection Pressure | 68.9 - 103 | MPa |
Injection instructions |
---|
Desiccant Type Dryer Required. |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
DOW™ HDPE 83754P | The Dow Chemical Company | HDPE | DOW™ HDPE |
Adiprene® Duracast® S930 | Chemtura | PUR-Ester/MDI | Adiprene® Duracast® |
Hifax TYC 258X S92908 | LyondellBasell Industries | PP Copolymer | Hifax |
ADENE® G05CYEG-00 | A.D. Compound S.p.A. | PP Copolymer | ADENE® |
LUVOCOM® 20-9293 | LEHVOSS Group | PPA | LUVOCOM® |