Order Products : sales@su-jiao.com
Hypro-G™ PP-CP35
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Entec Polymers |
| Trademark: | Hypro-G™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | tQVNMf_HyproGPPCP35.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Impact Copolymer, 35 Melt Flow This product meets the requirements of the US Food and Drug Administration as specified in 21 CFR 177.1520. |
| General Information | |
|---|---|
| Features |
|
| Agency Ratings |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 35 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 25.5 | MPa | ASTM D638 |
| Tensile Elongation (Break) | > 50 | % | ASTM D638 |
| Flexural Modulus | 1280 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm) | 75 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 105 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| biofila® linen | twoBEars GbR | Biodeg Polymers | biofila® |
| DURACON® YF-20 | Polyplastics Co., Ltd. | Acetal (POM) Copolymer | DURACON® |
| GLAMIDE® T-403 | TOYOBO America, Inc. | Nylon 6 | GLAMIDE® |
| OmniPro™ HPP GMR40 | OMNI Plastics, LLC | PP Homopolymer | OmniPro™ |
| Sumiliteresin® ECP-202 | SBHPP | Epoxy | Sumiliteresin® |
