Order Products : sales@su-jiao.com
HOPELEN J-120C
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Lotte Chemical Corporation |
| Trademark: | HOPELEN |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | tPQDCf_HOPELEN-J-120C.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| J-120C is homo polymer resin produced through the polymerization of propylene. This grade is designed to be processed in conventional Injection molding equipment. J-120C shows good thermal stability and has high strength and stiffness. It has broad range of property, and is used from industrial supplies to cap & closure base resin. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.900 | g/cm³ | ASTM D792, ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 2.1 | g/10 min | ASTM D1238, ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | |||
| Yield | 36.3 | MPa | ASTM D638 |
| Yield | 34.3 | MPa | ISO 527-2 |
| Tensile Elongation (Break) | < 100 | % | ASTM D638, ISO 527-2 |
| Flexural Modulus | |||
| -- | 1670 | MPa | ASTM D790 |
| -- | 1320 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | |||
| -10°C | 15 | J/m | ISO 180 |
| -10°C | 20 | J/m | ASTM D256 |
| 23°C | 49 | J/m | ASTM D256 |
| 23°C | 39 | J/m | ISO 180 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | |||
| 0.45 MPa, Unannealed | 125 | °C | ASTM D648 |
| 0.45 MPa, Unannealed | 105 | °C | ISO 75-2/B |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Asiga® PlasPINK | Asiga | Unspecified | Asiga® |
| AVALON® 95 AB | Huntsman Corporation | TPU-Polyester | AVALON® |
| DuraElast 1513-7 | Evermore Chemical Industry Co., Ltd. | TPU-Polyether | DuraElast |
| LEXAN™ EXL1162T resin | SABIC Innovative Plastics | PC | LEXAN™ |
| Latamid 12 H 90FE03 | LATI S.p.A. | Nylon 12 | Latamid |
