Order Products : sales@su-jiao.com
ALTECH® ABS A 1000/907
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | ALBIS PLASTIC GmbH |
| Trademark: | ALTECH® ABS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | tNfNX8_ALTECHABSA1000907.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
ALTECH®ABS A 1000/907 is an acrylonitrile butadiene styrene (ABS) product,. It can be processed by injection molding and is available in North America, Europe or the Asia-Pacific region. ALTECH®The application areas of ABS A 1000/907 include houses and tools. Features include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.04 | g/cm³ | ISO 1183 |
| Melt Volume-Flow Rate (MVR) (220°C/10.0 kg) | 34.0 | cm³/10min | ISO 1133 |
| Molding Shrinkage (24 hr) | 0.40 - 0.70 | % | ISO 294-4 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2300 | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 44.0 | MPa | ISO 527-2 |
| Tensile Strain | ISO 527-2 | ||
| Yield | 2.4 | % | ISO 527-2 |
| Fracture | 12 | % | ISO 527-2 |
| Flexural Stress | 65.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | ISO 179/1eA | ||
| -- | 18 | kJ/m² | ISO 179/1eA |
| -30°C | 7.0 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength | ISO 179/1eU | ||
| -- | 130 | kJ/m² | ISO 179/1eU |
| -30°C | 90 | kJ/m² | ISO 179/1eU |
| Notched Izod Impact (23°C) | 25 | kJ/m² | ISO 180/1A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, not annealed | 89.0 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 78.0 | °C | ISO 75-2/A |
| Vicat Softening Temperature | |||
| -- | 102 | °C | ISO 306/A50 |
| -- | 95.0 | °C | ISO 306/B50 |
| Thermal Conductivity 1 | 0.20 | W/m/K | ISO 22007-2 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Resistivity | > 1.0E+12 | ohms | IEC 60093 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | |||
| Dehumidification desiccant | 80 | °C | |
| Hot air dryer | 80 | °C | |
| Drying Time | |||
| Dehumidification desiccant | 3.0 - 6.0 | hr | |
| Hot air dryer | 2.0 - 4.0 | hr | |
| Processing (Melt) Temp | 220 - 260 | °C | |
| Mold Temperature | 50 - 80 | °C |
| Note Message | |
|---|---|
| 1 . | Integral |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| AKROMID® B3 3 S3 10 black 950063 (1809) | AKRO-PLASTIC GmbH | Nylon 6 | AKROMID® |
| ALTECH® NXT PP-H A 2040/458 GF40 CP | ALBIS PLASTIC GmbH | PP Homopolymer | ALTECH® NXT PP-H |
| FHR Polypropylene P4C5K-123A | Flint Hills Resources, LP | PP Homopolymer | FHR Polypropylene |
| EPO-TEK® H35-175MPT | Epoxy Technology Inc. | Epoxy | EPO-TEK® |
| Plaslube® POM CO GF30 TL5 | Techmer Engineered Solutions | Acetal (POM) Copolymer | Plaslube® |
