Order Products : sales@su-jiao.com

Marlex® HHM 5502BN

Category:	HDPE , High Density Polyethylene
Manufacturer:	Chevron Phillips Chemical Company LLC
Trademark:	Marlex®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	tMD87k_MarlexHHM5502BN.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

This high molecular weight hexene copolymer is tailored for light blow moulded containers that require:

Excellent stiffness

Exceptional processability

Typical blow moulded applications for HHM 5502BN include:

Household chemicals

Industrial chemicals

Pharmaceuticals

Toolboxes

Furniture

General Information
Features	Rigid, good High molecular weight Copolymer hexene comonomer Workability, good Compliance of Food Exposure
Uses	Blow molding applications Tools/Parts Box Industrial container Furniture Household goods Container Drug
Agency Ratings	ASTM D 4976-PE235 DMF not rated FDA 21 CFR 177.1520(c) 3.2a Europe No 10/2011
Forms	Particle
Processing Method	Blow molding

Physical	Nominal Value	Unit	Test Method
Density	0.955	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	0.35	g/10 min	ASTM D1238
Environmental Stress-Cracking Resistance (100% Igepal, Compression Molded, F50)	35.0	hr	ASTM D1693B

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D, Compression Molded)	63		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield, Compression Molded)	27.0	MPa	ASTM D638
Tensile Elongation ²(Break, Compression Molded)	600	%	ASTM D638
Flexural Modulus - Tangent (Compression Molded)	1370	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed, Compression Molded)	79.0	°C	ASTM D648
Brittleness Temperature ³	< -75.0	°C	ASTM D746A

Additional Information
The physical properties were determined on compression moulded specimens that were prepared in accordance with Procedure C of ASTM D4703, Annex A1.

Note Message
1 .	Type 4, 51mm/min
2 .	Type 4, 51mm/min
3 .	Type I specimen

Resin Grade	Manufacturer	Category	Trademark
AKROMID® B3 GF 20 1 natural (2462)	AKRO-PLASTIC GmbH	Nylon 6	AKROMID®
Crastin® HR5315HFS BK591	DuPont Performance Polymers	PBT	Crastin®
Grilamid® 1S XE 4224 nat	EMS-GRIVORY	Nylon 1010	Grilamid®
HONES® PPS HS-CT15-G	Guangdong Shunde Hones Polymer Material Co., Ltd.	PPS	HONES®
Optix® CP-1000 IG	Plaskolite, Inc.	Acrylic (PMMA)	Optix®